setenv PAVE_EXE <some pathname/executable name> will cause the pave script to use that version of the binary executable when launching PAVE.
setenv DENOMINATOR_CUTOFF <some floating point number> will cause PAVE to workaround divide by zero conditions. If this environment variable is set, then for each division, if the denominator is less than or equal to DENOMINATOR_CUTOFF's value, then the result of the divide is set to 0
setenv DISABLE_MAPS 1 will cause PAVE to disable map drawing by default on tile plots
setenv DRAW_GRID_LINES 1 will cause grid lines to be drawn by default on tile plots
setenv EDSS_MAPDIR <directory_name> will override PAVE's <top level PAVE directory>/$EDSS_ENV/bin/OPTIMIZE/maps dir, which is where PAVE looks for its maps by default.
setenv LEGEND_BINS &qu;1,10,100,1000&qu; for example will cause plots to be created with three colors that correspond to values of 1-10, 10-100, and 100-1000. The general format for the value of this environment variable is a comma separated list of numbers.
setenv NO_AUTHOR_STRING will cause PAVE not to put PAVE by MCNC on plots.
setenv PAVE_EXPORT_VARNAME <some alphanumeric string> can be used to override the default variable name of "VAR" when exporting data to netCDF files from PAVE.
setenv PAVE_DISTINCT_STATE_COUNTIES will cause PAVE to display state and county lines in different colors (gray / black).
setenv PAVE_VECTOBS_COLOR <colorName> will cause PAVE to draw the observational vectors with the specified color. Potential colors and RGB values are usually found in /usr/lib/X11/rgb.txt for non-Suns or /usr/openwin/lib/X11/rgb.txt on Suns.
setenv PRECLIP_LLLAT <0>
setenv PRECLIP_LLLON <-180>
setenv PRECLIP_URLAT <85>
setenv PRECLIP_URLON <70> will cause PAVE
to use a "pre-clip" map region bounded by the lat/lon coordinate
pairs (-180,0) and (70,85). These environment variables can be
used to access PAVE's world map over a region outside of North
America.
For further information on how to use the world map, please see the
PAVE FAQ located at
Pave.FAQ.html#WorldMap.
setenv PRINTER 200p_lw will cause tile plots to be sent to 200p_lw when printed
setenv SBUS_EXEC_RC <rc file name> can be used to override the default file ~/.edss_exec_rc, which is used to locate various EDSS subsystems
setenv SBUS_RLOGIN_RC <rc file name> can be used to override the default file ~/.edss_rlogin_rc, which is used for the userids to use for remote data access. You will only need to worry about this if your remote account's login name is not the same as your local login name.
setenv SCALE_VECTORS 1 will cause vector length to be scaled by their magnitude by default on vector plots
setenv SMOOTH_PLOTS 1 will cause PAVE to smoothly interpolate pixels on tile plots by default
setenv TENTHS_SECS_BETWEEN_FRAMES 10 will cause a minimum of 1 wall clock second between animation frames. Units are tenths of a second, allowable range is 0..50
setenv PAVE_COORD "GDTYP P_ALP P_BET P_GAM XCENT YCENT"
<some real number> can be used to define the projection
parameters. CAMx or UAM files in the Lambert conformal projection are
not self-contained, as the lambert parameters are not specified in the file header.
To inform PAVE that the CAMx or UAM file has the conformal projection,
specify the values using the PAVE_COORD environment variable.
GDTYP,P_ALP,P_BET,P_GAM,XCENT,YCENT are defined in the the IOAPI documentation
http://www.baronams.com/products/ioapi/GRIDS.html
An example for a lambert conformal grid with a reference lat/lon of (40N,100W)
and latitudes of two parallels, 60N and 30N. Note XCENT is typically equal to
P_GAM.
setenv PAVE_COORD "2 30 60 -100 -100 40"
setenv [ P_ALP|P_BET|P_GAM|XCENT|YCENT|XORIG|YORIG|XCELL|YCELL ]
<some real number> can be used to supersede any of the respective
netCDF header values. Before
creating a PAVE plot, the environment variables will be checked and
appropriate fields replaced.
setenv UAM_MISSING_VALUE <some floating point number> can be used to define a value that corresponds to missing data for UAM format files. If this environment variable is not set, the value defaults to -999.0.
setenv USE_LOCAL_VISD will cause PAVE to read all files on the local computer with the visd instead of as local files. This is useful if a file to be visualized on a 64 bit capable SGI is larger than 2 GB. This should only be used at times when very large files are being visualized because it is slower than reading files locally.
setenv VECTOR_COLOR <colorName> will cause PAVE to draw the vectors with the specified color. Potential colors and RGB values are usually found in /usr/lib/X11/rgb.txt for non-Suns or /usr/openwin/lib/X11/rgb.txt on Suns.
setenv ADD2DHLINE <some floating point number> used to define a horizontal line to a 2-D plot such as a timeseries plot.
setenv GRAPH2DCFG <blt filename> This specifies a BLT configuration file that can be modified to configure 2D plots. All 2D plotting in PAVE is generated using the BLT library, which is an extension to the (Tcl)/Tk library.
setenv HOST <machine name or ip address> used to specify a remote hostname from which to obtain a file, used in the -f option.