PUBLICATION
OF THE
Last Updated
|
|
|
|
|
|
Computer: |
|
Consultants' Network: |
|
EDS/C&S & MTT-S/AP-S: |
|
MTT-S/AP-S |
|
|
|
IEEE-USA: |
Five
U.S. Technical Job Classifications Show Employment Drop, One Shows Steep
Increase |
IEEE-USA: |
IEEE-USA
Launches Employment Navigator to Enhance Members’ Career Vitality |
IEEE-USA: |
|
IEEE-USA: |
|
|
|
|
IEEE-USA President to be
Inducted into New Jersey Inventors Hall of Fame |
|
|
|
|
|
|
|
|
|
|
|
IAS/PES Course: |
Advanced Concepts in
Transformer Protection Technical Seminar |
IAS/PES Course: |
Upgrade of Generator
Protection to Comply With IEEE Guides Technical Seminar |
NJ Section Course: |
|
NJ Section Course: |
|
NJ Section Course: |
New! |
= New Announcement Not Published in
Paper Newsletter |
Update! |
= Change to Meeting Time or Location |
Volume 52, Number 2
Publication No:
USPS 580-500
“The IEEE Newsletter”
(North Jersey Section), is published monthly except June and July by The
Institute of Electrical and Electronics Engineers, Inc. Headquarters:
NEWSLETTER STAFF
Editor...........................................
Business
Manager......................
k.saracinello
“AT” ieee.org (908) 791-4067
Deadline for receipt of material is the 1st
of the month preceding the month of publication. All communications concerning
editorial and business matters, including advertising, should be sent to the
Business Manager via e-mail at k.saracinello “AT” ieee.org or to The IEEE Newsletter, c/o
IEEE NJ SECTION HOME PAGE
IEEE NJ SECTION NEWSLETTER HOME PAGE
http://web.njit.edu/~ieeenj/NEWSLETTER.html
REPORT ADDRESS CHANGES TO:
SECTION OFFICERS
Chair.......................................................
har.dayal
“AT” baesystems.com (973) 633-4618
Vice-Chair-1................................
b.chivukula
“AT” computer.org (732) 718-3818
Vice-Chair-2.............................................
kdixit
“AT” ieee.org (201) 669-7599
Treasurer................................. Dr.
s.shin
“AT” ieee.org (973) 492-1207 Ext. 22
Secretary..........................................
rpepe
“AT” att.net (201) 960-6796
Members-at-Large:
Dr.
Dr.
Richard Snyder (r.snyder “AT” ieee.org)
The
August
2005
Aug. 2 – “Model-based Development
of Embedded Software!” - NJ Computer Chapter,
Aug. 3 – “NJ Section Meeting”,
Upcoming Meetings
Sept. 7 – “NJ Section Meeting”,
Sept. 21 –
“Quantum
Engineering of Nanoelectronic Device”
– EDS/C&S, & MTT-S/AP-S Chapters, 7:00 PM (buffet at 6:15 PM), NJIT,
202 ECE Center, Newark, NJ. Dr. Richard
Snyder (973) 492-1207 (RS Microwave), Dr. Edip Niver (973) 596-3542 (NJIT), Har
Dayal (973) 633-4618 (har.dayal “AT” baesystems.com), or
Sept. 29 –
“Experiences in
Accounting” - NJ Consultants' Network,
Sept. ? – “Field Programmable Gate Array Seminar”
- NJ Section, Time, Date and Location TBA.
See http://web.njit.edu/~ieeenj/
and upcoming Newsletters for updates.
Sept. ? – “Oracle Database Concepts Including SQL for
Programmers” - NJ Section, Time, Date and Location
TBA. See http://web.njit.edu/~ieeenj/
and upcoming Newsletters for updates.
Oct. 6 – “2005 MTT/AP Symposium and Mini-Show” – MTT-S/AP-S Chapter, 9:30 AM - 5:30 PM, Prime Hotel & Suites
(formerly Radisson Hotel Fairfield), 690 Route 46 East, Fairfield, NJ.
Oct.
11-Nov. 29 – “Project Management” – North Jersey Section, North Jersey Section,
Tuesday Evenings, 8 sessions, 6:30-9:00 PM, NJ International Bulk Mail Center,
80 County Rd, Jersey City, NJ. Bhanu
Chivukula (b.chivukula “AT” computer.org).
Oct. 20– “Life Grade Luncheon” -
Oct. 28 – “Advanced Concepts in Transformer Protection Technical Seminar” - NJ IAS/PES Chapters,
Nov. 18 – “Upgrade of Generator Protection to Comply With IEEE Guides Technical
Seminar” - NJ IAS/PES
Chapters,
Members and Non-Members Welcome
PLEASE POST
On Tuesday, August 2nd,
2005, the IEEE North Jersey Section Computer Chapter will host a presentation titled
“Model-based Development of Embedded Software” by Dr. Insup Lee.
About the Talk
An
embedded system typically consists of a collection of components that interact
with each other and with their environment through sensors and actuators. Examples of embedded systems include
manufacturing controllers, automotive controllers, avionic systems, medical
devices, and robots. There are many
factors, which complicate the design and implementation of embedded systems, due
to ever increasing complexity, capability, and sophistication in their
operating platforms and application requirements.
We
have been developing CHARON (www.cis.upenn.edu/mobies/charon/)
and its toolset to facilitate the development of embedded systems. CHARON is a hybrid system modeling language
that is specifically designed to support modular and hierarchical
specifications with compositional semantics.
Hybrid systems are finite state machines with continuous dynamics, and
are a natural formalism for modeling many types of embedded systems. Based on CHARON, we are developing techniques
and tools for hierarchical and distributed simulation, reachability analysis,
automatic code generation, automatic test generation, and run-time monitoring
and checking. In this talk, the
following will be presented: an overview
of CHARON, correctness of simulation, code generation, and two case studies: AIBO by SONY and infusion pump.
About the Speaker
Insup
Lee received a BS degree in mathematics from the
His
research interests include embedded systems, real-time computing, formal
methods and tools, medical device systems, wireless sensor network, and
software engineering. He has developed
programming concepts, language constructs, and operating systems for real-time
systems. In recent years, he has
developed specification, analysis, and testing techniques based on real-time
process algebra (ACSR). In addition, he
has developed a hierarchical specification language for hybrid systems
(CHARON). Based on CHARON, he has been
developing techniques for automatic code generation and test generation. He also has been developing the run-time
monitoring and checking framework (MaC) that can be used to assure the
correctness of a running system through monitoring and checking of safety and
QoS properties; the prototype MaC system has been implemented in Java and
C. Lately, he has been developing programming
abstraction and security techniques for sensor networks, as well as applying
high-assurance techniques to medical devices software systems.
He
was Chair of IEEE Technical Committee on Real-Time Systems for 2003-2004. He has served on numerous program committees,
and also (co-) chaired several conferences and workshops, including IEEE
Real-Time Systems Symposium in 1992 and 1993, International Workshop on
Real-Time Computing Systems and Applications in
1994
and 1996, CONCUR '95 (International Conference on Concurrency Theory) in 1995,
IEEE International Symposium on Object-oriented Real-time distributed Computing
(ISORC) in 1998 and 2000, and EMSOFT in 2003.
He has been on the editorial boards of IEEE Transactions on Computers
(1995-2000), Formal Methods in System Design, Journal of Electrical Engineering
and Information Science, and Real-Time Systems Journal. He has been an IEEE CS DVP (Distinguished
Visitors Program) speaker since 2004, and is Co-Chair of IEEE CS Technical
Steering Committee on Embedded Systems.
Dr. Lee is an IEEE fellow.
All Welcome!
You do not have to be a
member of the IEEE to attend. Bring your
friends and network during the free pre-meeting buffet starting at 6:00 PM.
Time:
Place: Lucent Technologies,
Information:
Seth Jakel (973) 731-1902 or (908) 243-8715 or (973)
820-1865 (sgjakel “AT” comcast.net), Howard Leach (973) 540-1283 (hhleach “AT”
aol.com), Vivek Shaiva (908) 229-6125 (vshaiva “AT” computer.org), or Arthur
Greenburg (973) 386-6673 (ahg1 “AT” lucent.com). Registration
in advance is recommended with full name, affiliation and nationality so
that an admission badge will be available for you on arrival.
On September 29, 2005, the
IEEE Consultants’ Network of Northern NJ (CNNNJ) will host a discussion on
“Experiences in Accounting”. A panel of
experienced independent consultants will lead the discussion.
About the Talk
Independent
consultants face special problems when it comes to accounting, especially
regarding taxes and insurance. Members of CNNNJ will pool their collective
experience and knowledge and share it with the attendees for what promises to
be an entertaining panel session.
Accounting
and insurance issues will be discussed as they relate to self-employed
consultants, especially IRS rules about
1099 vs. W2, (section 530 vs. 1706), when to make estimated payments, social
security and Medicare, the difference between subchapter S and C, LLCs, and
other options, section 179 deduction rules, depreciation, home office
deductions, state specific issues, and insights into what if any liability
insurance or any compulsory insurance independent consultants should have.
About the
Speaker
Biographies of CNNNJ members,
some of whom have more than 20 years of experience as independent consultants,
may be found on our website at http://www.technologyontap.org, where you can also sign up
for our newsletter and find information about joining CNNNJ. All attendees on the 29th are invited to
participate and share their business knowledge and related anecdotes with their
peers.
All Welcome!
Everyone welcome. No registration needed. Free admission.
About the
Consultants’ Network
Founded
in 1992, the IEEE Consultants Network of Northern NJ encourages and promotes
the use of independent technical consultants by business and industry.
Time:
Place: Aeroflex/KDI-Integrated
Products,
Information: For directions and up-to-date
meeting status, call Robert Walker (973) 728-0344 or visit our website at www.TechnologyOnTap.org. To download a map to KDI, go to: http://www.mcekdi-integrated.com/directions.htm.
On September 21, 2005,
the IEEE NJ Section Electron Devices, Circuits and Systems Chapters together
with MTT/S/AP-S and the New Jersey Institute of Technology will host a talk on
“Quantum Engineering of Nanoelectronic
Devices." The speaker will be
Professor Vijay K. Arora.
About the Talk
Quantum
(digital-type) concepts are gaining prominence over and above classical
(analog-type) ones in miniaturized devices where nanometer size can be less
than or equal to the de Broglie wavelength of an electron in any of the three
Cartesian directions. An electric field
driving electrons in these devices can be extremely high. This converts random carrier motion to a
streamlined one, thereby limiting the velocity to thermal velocity or Fermi
velocity depending on the degeneracy of the sample. This re-organization of the carrier
velocities makes familiar Ohm’s law invalid, thereby enhancing the role of
high-field velocity saturation in performance evaluation and characterization
of nanostructures. Further, a free
flight of a carrier may be interrupted by an emission of a quantum of energy in
the form of a phonon or photon. This
emission further limits the saturation velocity and also degrades the diffusion
coefficient. The seminar will
demonstrate that a higher mobility does not necessarily lead to a higher
saturation velocity showing independence of the saturation velocity on
mobility-limiting scattering mechanisms.
A review of quantum-mechanical and high-field effects that have impact
on the design of optoelectronic devices and other nano-circuits is presented.
About the Speaker
Vijay K. Arora, a tenured
Professor of Electrical Engineering and Engineering Management at Wilkes
University, held distinguished visiting appointments at the University of
Illinois (1981-82), the University of Tokyo (1989-90), National University of
Singapore (1991-93), Nanyang Technological University (1999-2000), and the
University of Western Australia (2000-2001).
In addition to his long-term visiting appointments, Professor Arora
visits several international institutions on short-term consulting assignments
and enjoys the privilege of knowing the cultures and educational methods being
practiced around the globe. In recognition
of his research, he was invited to give presentations at several international
scientific gatherings. His research
interests include mobility limiting mechanisms in high-speed devices, including
quantum and high-field effects.
Professor Arora has authored or co-authored over 150 papers on
scientific and educational issues. As
past chair of the International Division of American Society for Engineering
Education (ASEE), he organized several international events. As chair of the 1996 ASEE Mid-Atlantic
Conference, he edited and published the proceedings entitled Re-Engineering
Education and Training for a Competitive Global Economy. Professor Arora is on the Distinguished
Lecturer Program of the IEEE Electron Devices Society and APS Forum on Industrial
and Applied Physics and is listed in several biographies. He was recently named Leading Educator of the
World 2005.
All Welcome!
You do not have to be a
member of the IEEE to attend.
Time: 7:00 PM, Wednesday, September
21, 2005. Free buffet will be starting
at 6:15 PM.
Place: New Jersey Institute of
Technology (NJIT), Room 202,
Information: Dr. Richard Snyder (973) 492-1207 (RS
Microwave), Dr. Edip Niver (973) 596-3542 (NJIT), Har Dayal (973) 633-4618
(har.dayal “AT” baesystems.com), or
Paul
Ward, a member of the NJ Section IEEE USA and Co-chair of its PACE committee,
is looking for (a donation of) electronic test equipment that can be used for
teaching electronics and electricity to students with learning disabilities
(LD) at the Craig Upper School in Lincoln Park, NJ. This school is a private institution that
receives its operating funds from either the parents of the students or some
governmental subsidy.
The
Paul
is trying to accumulate a couple of oscilloscopes, multimeters (analog or
digital), oscillators, and function generators, so that a Basic EE course could
be put together for a technical course and added to the present academic curriculum. The course would help the student to connect
what he or she learned in Mathematics and Science into a practical experience.
The
equipment does not have to be in perfect condition, just safe and usable.
If
you can donate such equipment, please send it to the following address:
Attn: Paul Ward
200
Comely Road
Alternatively,
contact Paul Ward at (973) 790-1625 or PWard1130 “AT” aol.com. He will pick it up if needed.
Washington
(15 June 2005) - Five major engineering and computer job classifications showed
a drop in employment in the first quarter of 2005 vs. the 2004 average, while
one showed a large increase, according to data compiled by the U.S. Department
of Labor’s Bureau of Labor Statistics (BLS).
The
biggest drop was among computer hardware engineers (18,000), followed by
computer software engineers (13,000), computer programmers (8,000), electrical
and electronics engineers (8,000) and computer and information systems managers
(5,000). Contrasted with this loss of
52,000 jobs, the BLS reported a gain of 54,000 jobs among computer scientists
and systems analysts.
“While
we are encouraged by the employment growth among computer scientists and
systems analysts, the continuing shrinkage of other technical specialties
signals that all is not well in electrotechnology professions,” IEEE-USA
President Gerard A. Alphonse said.
Percentage-wise,
the computer hardware engineers workforce declined by 18.8%, while computer
scientists and systems analysts experienced 7.7% growth. The other four job classifications fell
modestly, and the overall increase in technical employment was less than 1%
(0.1).
This
table summarizes the BLS data:
Job Classification |
2004Avg |
1Q2005 |
Change |
Pct. |
Computer Hardware
Engineers |
96,000 |
78,000 |
-18,000 |
-18.8 |
Computer & Info.
Systems Managers |
337,000 |
332,000 |
-5,000 |
-1.5 |
Computer Programmers |
564,000 |
556,000 |
-8,000 |
-1.4 |
Computer Scientists &
Systems Analysts |
700,000 |
754,000 |
54,000 |
7.7 |
Computer Software |
813,000 |
800,000 |
-13,000 |
-1.6 |
Electrical &
Electronics Engineers |
343,000 |
335,000 |
-8,000 |
-2.3 |
Total |
2,853,000 |
2,855,000 |
2,000 |
0.1 |
Washington
(1 July 2005) - The IEEE-USA Employment Navigator allows IEEE members to
connect quickly with hiring employers, build and send effective resumes and
link to salary benchmarking and other career resources.
Employment
Navigator collects 5 million job leads from 160,000 Web sites and places them
in a single searchable database. The
information comes from corporate Web sites, job boards, government and
newspaper sites, and niche job sites (geography, industry and occupation
specific). With this tool, IEEE-member
subscribers get access to unpublished job opportunities that never leave an
employer’s website (an estimated 30% of jobs in the database).
The
portal also provides tools for resume creation and distribution, and links to
other IEEE resources like the IEEE Job Site (http://careers.ieee.org/) and
the IEEE-USA Salary Service (http://www.ieeeusa.org/careers/salary/).
In
a recent survey of Employment Navigator users, more than two-thirds rated the
tool valuable or very valuable; 75% log in daily or weekly to search for jobs;
and two-thirds reported finding leads not found on any job board.
A
six-month subscription is just $50 for IEEE members.
See
http://www.ieeeusa.org/careers/employmentnavigator
for more information.
In
the Court's 9-0 opinion, Justice David Souter wrote that "one who
distributes a device with the object of promoting its use to infringe
copyright, as shown by clear expression or other affirmative steps taken to
foster infringement, is liable for the resulting acts of infringement by third
parties." The Supreme Court adopted an active inducement standard as
advocated by IEEE-USA in its amicus brief filed with the Court. The decision imposes liability on companies
that actively encourage or "induce" customers through words and deeds
to infringe on copyrighted material, which focuses legal scrutiny on the
company's infringing conduct rather than restricting its technology.
According
to Justice Souter, the active inducement rule "does nothing to compromise
legitimate commerce or discourage innovation having a lawful promise." He
added that patent law's commerce doctrine, now codified, "leaves breathing
room for innovation and a vigorous commerce."
Innovation
will not be stifled, according to Justice Souter, who said: "We are, of course, mindful of the need
to keep from trenching on regular commerce or discouraging the development of
technologies with lawful and unlawful potential...The inducement rule...premises
liability on purposeful, culpable expressions and conduct, and thus does
nothing to compromise legitimate commerce or discourage innovation having a
lawful promise."
IEEE-USA's
Greenberg noted: "Active inducement
has been part of patent law for more than 100 years, and has stood the test of
time. In all that time, the sky has not
fallen for technology companies in patent law," and it can be assumed
"that a parade of 'horribles' will not follow under copyright
principles."
To
read the Court's opinion, see http://wid.ap.org/scotus/pdf/04-480P.ZO.pdf.
To
view IEEE-USA’s amicus brief in the case, go to http://www.ieeeusa.org/policy/POLICY/2005/MGMvGrokster.pdf.
For
more on inducement, visit IEEE-USA's website at http://www.ieeeusa.org/policy/issues/INDUCE/index.html.
Greenberg,
who co-authored the amicus curiae brief IEEE-USA filed in the case, wrote in
USA Today that, “By adopting the active inducement standard ... the Supreme
Court found an elegant and just balance to preserve technological innovation
and prevent copyright infringement. ... This week, the public won."
To
view an electronic copy of Greenberg’s letter, go to http://www.usatoday.com/news/opinion/editorials/2005-06-30-letters-court_x.htm.
For
more on IEEE-USA’s participation in this case, visit http://www.ieeeusa.org/policy/issues/induce/index.html.
For
more IEEE-USA in the News items, go to http://www.ieeeusa.org/communications/inthenews/default.asp.
The
This
is the eighth
The new exhibit has garnered accolades for the
IEEE and the
Washington
(10 June 2005) - IEEE-USA President Dr. Gerard A. Alphonse of Princeton, NJ,
was inducted into the New Jersey Inventors Hall of Fame on 23 June.
An
IEEE Fellow who holds more than 50
"I
never dreamed of joining the ranks of such prestigious inductees,"
Alphonse said. "I feel both proud
and humbled to receive such a great honor and mark of distinction, with my name
joining those of famous inventors."
Alphonse
invented and demonstrated the world's highest performance superluminescent
diode in 1986. The device is a broadband
semiconductor light source and key component of next-generation fiber optic
gyroscopes, low coherence tomography for medical imaging, and external cavity
tunable lasers with applications to fiber optic communications.
Alphonse
is a founder and senior vice president of advanced technologies for Medeikon
Corp., an optical technology developer for medical diagnostics and therapy in
Alphonse
and three others were selected for the New Jersey Inventors Hall of Fame by the
New Jersey Research and Development Council, a nonprofit association dedicated
to creating a strong, healthy environment for the continued growth of R&D
within the state. The council also
recognizes inventors, innovators and graduate students.
The
honorees were recognized at a luncheon at the New Jersey Institute of
Technology in
The NNJ IEEE Section ExCom is seeking new volunteers to help conduct
business at the section level for the benefit of its membership in the
If you would like to become involved with volunteering in some of these
efforts or positions or just become more informed about what is happening at
the NNJ IEEE Section, please contact the persons listed below for additional
information and questions. You can even
attend the section business meeting held the first Wednesday of every month to
find out more and other volunteer activities that require some help.
Some of the positions currently open and available are:
• LEOS Chapter
Chair. Contact Har Dayal (har
"DOT" dayal "AT" baesystems "DOT" com)
• Controls Chapter
Chair. Contact Howard Leach (Hhleach
"AT" aol "DOT" com)
• GOLD Affinity Group
Chair. Contact Dick Tax (rtax
"AT" bellatlantic "DOT" net)
• Historian Committee
seeks help collecting IEEE historical information and specifically IEEE North
Jersey Section History. Contact Al
Stolpen (a "DOT" stolpen "AT" ieee "DOT" org)
• Student Activities Committee
seeks new volunteers for
Additionally, if interested volunteers would like to get more general
information about other activities in our section, visit the North Jersey
Section website for newsletter information http://web.njit.edu/~ieeenj/ or contact Har Dayal, har "DOT" dayal "AT"
baesystems "DOT" com.
The IEEE North Jersey
Section has been helping fellow engineering professionals for the last fifty
years. The Education Committee has
successfully conducted software and engineering training courses over the last
few decades. The Committee is committed
to professional development of the members and the instructors for the courses
are very qualified and experienced in their respective fields. Classes are arranged on weekday evenings or on
Saturdays provided at least fifteen candidates are available. Completion certificates are issued by IEEE
Headquarters with CEU credits for the number of training hours.
Due to the slow growth of
the economy and several other factors, registration for these courses has
diminished over the last few years. I
would urge members to send their feedback regarding what courses they would be
interested in, the format, location, and day/time, etc., by email to b.chivukula
“AT” computer.org.
Regards,
Bhanu
Chivukula
Chair,
Education Committee
Vice
Chair, IEEE North
The
North Jersey Section (Education Committee) is looking for conference room
facilities to hold their training seminars.
The seminars are being held on one weeknight from
Wayne Owens – For
dedicated service to the IEEE North |
Har Dayal – For dedicated service to the IEEE North
Jersey Section and the MTT/AP Society |
William Terry Distinguished Lifetime Service Award Ken Oexle – For a lifetime of sustained, dedicated
and wide-ranging service to the IEEE at the Section, Council and Chapter
levels |
IEEE Regional Activities Board Leadership Award Dr. Durgamadhab Misra – For promoting IEEE
membership and activities within the North Jersey Section |
PES Chapter Outstanding Engineer Award Anne Giedlinski – For leadership and outstanding contributions
in the fields of distribution engineering and service to the North Jersey PES
Chapter and Section |
From left – Mr. and Mrs. Won Kim, Thomas Wood, and
Iwan Santoso
From left – Paul Ward and
They are joined by family
members.
From left – Barry Perlman,
Mrs. Perlman, Willie Schmidt, and Richard Snyder
From left – Ron Quade – PES
Chair, Ken Oexle – Awards Chair, and Roland Dixon – IEEE Region 1 PES Chapter Representative,
present PES Outstanding
Engineer Award to Anne Giedlinski
The PES Chapter and the Section
will sponsor a luncheon for North Jersey IEEE Life Grades (Members, Senior
Members and Fellows) on Thursday October 20 at the
Advance registration is required prior to October
11. We can accommodate only 30
people. Registrations will be processed
in the order of receipt and will be confirmed by return mail. Please complete the following registration
form and include a check Payable to the North Jersey Section IEEE in the amount
of $5.00 per person.
Reservations cannot be accepted at the door. For additional information contact Ken Oexle
(973) 386-1156.
IEEE
Life Grade Luncheon
Name_________________________________________
Address_________________________________________
Phone _________________________________________
IEEE #______________ Life Grade ____Yes
Return to:
Ken Oexle
Prior to October 11 and enclose a $5.00 check payable
to NJ Section IEEE
|
IEEE MTT-Society and AP-Society
Joint Chapter PRESENT 20TH ANNUAL SYMPOSIUM AND
MINI-SHOW |
|
FOCUS: CURRENT TOPICS IN RF AND MICROWAVE
COMMUNICATION
Thursday,
October 6, 2005
Prime
Hotel & Suites (formerly Radisson Hotel
690
Route 46 East,
SCHEDULE OF EVENTS
·
10–12 Lectures Featuring Speakers from Leading Companies
with Emphasis on Military Electronics,
Wireless Technologies and Microwave Communications.
(COMPLIMENTARY LUNCH SERVED)
Details of the schedule, speakers and topics can
also be found at the IEEE North Jersey Section Newsletter webpage:
http://web.njit.edu/~ieeenj/NEWSLETTER.html
For further information contact
Chair/Exhibition: |
|
(201) 669-7599 |
Kdixit “AT” kivimicrotech.com |
Publicity: |
Arthur Greenberg |
(973) 386-6673 |
ahg1 “AT” lucent.com |
Event/Location Co-Ordinator: |
Ken Oexle |
(973) 386-1156 |
|
Section Chair/Coordinator: |
Har Dayal |
(973) 633-4618 |
har.dayal “AT” baesystems.com |
Technical Program Chair: |
George Kannell |
(973) 386-4170 |
gkk “AT” lucent.com |
THERE IS NO CHARGE TO ATTEND THE SYMPOSIUM OR SHOW
The
PES and IAS Chapters will sponsor a one-day seminar covering Advanced Concepts
in Transformer Protection. The session
will be held on Friday, October 28 at the
Topics
Protection
of Power Transformers
1) Modes of Transformer Failure
a)
Winding Failures and causes (moisture, overheating, etc)
b)
Voltage regulating tapchangers
c)
Bushings
d)
Core issues
e)
Misc. (CTs, oil leakage, overvoltage, v/Hz, etc)
2) Types of Protection
3) Mechanical
a)
Accumulated gases
b)
Pressure relays
c)
Thermal
§
Hot spot temperature
§
Heating due to overexcitation, harmonics solar induced (DC)
§
LTC overheating (arcing)
4) Electrical
a)
Fuse
b)
Overcurrent protection
c)
Overexcitation
d)
Overvoltage
e)
Differential
f)
Ground differential
5) Unique factors for differential electrical protection
a)
Differential protection basics
§
Classic three line with matching CTs
§
Digital implementation with matching, vector and zero-sequence
accomplished in software
b)
Current magnitude differences
§
Winding ratio
§
CT ratio differences
§
Tapchangers
§
Mitigating current magnitude differences
c)
Vector shift/quantity derivation differences
§
Phase shift
§
CT configuration
§
Operating state diffrential current differences
§
Mitigating vector shift/quantity derivation differences
d)
Inrush phenomena and its effect on differential systems
§
Types of inrush
§
Initial
§
Recovery
§
Sympathy
§
Mitigating inrush phenomena and its effect on differential systems
e)
CT saturation and effect on differential systems
§
Causes and waveform patterns
§
Mitigation of CT saturation effects on differential systems
f)
Overexcitation and effect differential systems
§
Causes and waveform patterns
§
Mitigation of overexcitation effects on differential systems
g)
Use of a ground differential element for sensitivity near transformer
neutral
h) Use of
directional criteria for additional security (vs, high-Z method)
6) Special concerns
a)
Switch on to fault
§
High side
Use of high set differential
element for sensitivity
§
Low Side
Use of ground differential
element for sensitivity
7) Back up protection
a)
High side (50, 51, BF)
b)
Low side (51N, 51, 46, BF)
Setting a
Relay – Overcoming Engineering Challenges
1)
Configure relay to
“the outside world”
2)
Element enabling
3)
Element setting
4)
Setting groups
5)
Purposes and
configuration
6)
Input / Output
Matrixing (Marshalling)
7)
Programmable logic
8)
Setpoint review
& printout
9)
Input / Output
review & printout
10)
File saving &
recall (file management)
Commissioning
of Transformer Differential Protection Systems
1) Phasing
Issues
a)
A-B-C vs. A-C-B
b)
The “dreaded
delta” winding
c)
The even more
dreaded delta CT winding
2) Polarity
Issues
a)
Roll anyone?
3) Injection
Testing
a)
From the panel
inward
4) Load Testing
a)
From the panel
outward
5) Tools for
Commissioning
a)
Advanced metering
§
Examples of
phasing and roll issues
b)
Vector displays
§
Examples of
phasing and roll issues
c)
Digital
Oscillography
§
Examples of
phasing and roll issues
About the Instructor
The instructor will be Chuck
Mozina, Consulting Engineer with Beckwith Electric. Chuck Mozina is a Contract Consultant,
Protection and Protection Systems for Beckwith Electric Company, Inc.,
specializing in power plant and generator protection. His consulting practice involves projects
relating to protective relay applications, protection system design and
coordination.
Chuck is an active 20-year member
of the IEEE Power System Relaying Committee (PSRC) and is the past chairman of
the Rotating Machinery Subcommittee. He
is active in the IEEE IAS I&CPS committee, which addresses industrial
protection system. He is the past
Chuck has a Bachelor of Science in Electrical
Engineering from
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
If desired, IEEE Continuing Education Units will be
offered for this course. A small fee of
$15 will be required for processing. A
total of 0.4 CEUs will be offered.
Please indicate if desired below.
The registration fee for this seminar prior to
October 14th will be $150 for non-IEEE members, $100 for IEEE Members, $75 for
GOLD Graduates (last 1-10 years) and $25 for students with valid ID. The fee will be waived for IEEE Life Member
Grades with verification at the seminar.
Registrations after October 14th must include an additional late fee of $25. The seminar fee includes lunch, refreshments,
and handouts. Non-members joining IEEE
within 30 days of the seminar will be rebated 50% of the IEEE registration
charge.
Time: |
|
Place: |
|
Directions: |
www.pseg.com/customer/business/small/facility/edison_directions.jsp |
Information: |
Ronald W. |
Registration:
Beckwith Transformer Protection,
Register via
US mail to: Ronald W. Quade,
PE
Eaton
Electrical
Name____________________________________________________________________________________
Address__________________________________________________________________________________
Phone__________________ Email____________________________________________________________
IEEE
#_________________ Student @________________ Non IEEE_____ Life Member______
Continuing Education Units: Yes $15 No
If CEUs are chosen, please include a
$15 processing fee
Payment Enclosed $_______________
Add $25 late registration after October 14th
Make checks
payable to North Jersey Section IEEE
The
PES and IAS Chapters will sponsor a one-day seminar covering the Upgrade of
Generator Protection to Comply with IEEE Guides. The session will be held on Friday, November
18 at the
Topics
·
Quality Issues and Standards
· MTBF Calculation
· Production Testing
· Power Source Reliability
· Conformal Coating
· C37.90: Relays and Relay Systems Associated with Electric
Power Apparatus
· C37.90.1: Surge Withstand Capability (SWC) Tests
· C37.90.2: Withstand Capability of Relay Systems to Radiated
Electromagnetic Interference from Transceivers
·
Latest Generator Protection developments reflected in:
· Std. 242: Buff Book
· CIGRE Protection Practices
Survey
· C37.102: IEEE Guide for Generator Protection
· C37.101: IEEE Guide
for AC Generator Ground Protection
C37.106: IEEE Guide for Abnormal Frequency Protection for Power Generating Plants
·
Review of Grounding Techniques
·
Types of Generator Connections
·
Improved Sensitivity
· Negative Sequence Protection
down to continuous rating
· 100% Stator Ground Fault
§
Neutral Overvoltage
§
Third Harmonic Neutral Undervoltage need for Supervision
§
Benefits of Third Harmonic Voltage Ratio Detection
§
Online/Offline 100% Protection with Injection Method
· Field Ground Fault and Brush
Liftoff Detection with Injection Method
· Split-Phase Differential
with Turn-to-Turn Fault Detection
· Overexcitation Function with
Inverse Time and Integrating Reset Characteristics
· Low Directional Power
Sensitivity Requirements for Sequential Tripping
·
Improved Security
· Distance Element
Enhancements
§
3 Zone Elements with Current Threshold Supervision and Delta-Wye
Transform
§
Load encroachment blinding
Power swing blocking (for stable swings)
· Out-of-Step Protection
Power Transfer and
System Instability
Preferred Single Blinder Method
· Loss of Field
§
Dual Mho Element to ride through system swings
§
Flexible Settings to match machine capability curves.
Voltage supervision for fast trip release
·
Abnormal Frequency
· Four-Step Frequency
Detection to Coordinate with System Load Shed Schemes
· Rate of Change of Frequency
Tripping
· Six-Band Under Frequency Accumulator,
Alarm and Trip
·
Protections Against External Device Failure
· Inadvertent Energizing
· Generator Breaker Failure
Pole Flashover (prior to syncing)
One, Two or Three VT Fuse Loss (Integrated)
· Trip Circuit Monitoring
·
Operating, Commissioning and Analysis Tools
· Advanced Metering
· Event Logs with millisecond
time tag
· Vector Meters
· Real-Time Element R-X
Graphics
Expanded Oscillography with Embedded Phasor, Impedance and PQ Diagrams
·
Communications
· Modbus, Modbus TCP
· RS-232, RS-485, Ethernet
· IRIG-B
About the Instructor
The instructor will be Chuck
Mozina, Consulting Engineer with Beckwith Electric. Chuck Mozina is a Contract Consultant,
Protection and Protection Systems for Beckwith Electric Company, Inc.,
specializing in power plant and generator protection. His consulting practice involves projects
relating to protective relay applications, protection system design and
coordination.
Chuck is an active 20-year member
of the IEEE Power System Relaying Committee (PSRC) and is the past chairman of
the Rotating Machinery Subcommittee. He
is active in the IEEE IAS I&CPS committee, which addresses industrial
protection system. He is the past
Chuck has a Bachelor of Science in Electrical
Engineering from
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
If desired, IEEE Continuing Education Units will be
offered for this course. A small fee of
$15 will be required for processing. A
total of 0.4 CEUs will be offered.
Please indicate if desired below.
The registration fee for this seminar prior to
November 4th will be $150 for non-IEEE members, $100 for IEEE Members, $75 for
GOLD Graduates (last 1-10 years) and $25 for students with valid ID. The fee will be waived for IEEE Life Member
Grades with verification at the seminar.
Registrations after November 4th must include an additional late fee of
$25. The seminar fee includes lunch,
refreshments, and handouts. Non-members
joining IEEE within 30 days of the seminar will be rebated 50% of the IEEE
registration charge.
Time: |
|
Place: |
|
Directions: |
www.pseg.com/customer/business/small/facility/edison_directions.jsp |
Information: |
Ronald W. |
Registration:
Beckwith Generator Protection, 11/18/2005
Register via
US mail to: Ronald W. Quade,
PE
Eaton
Electrical
Name____________________________________________________________________________________
Address__________________________________________________________________________________
Phone__________________ Email____________________________________________________________
IEEE #_________________
Student @________________ Non IEEE_____ Life Member______
Continuing Education Units: Yes $15 No
If CEUs are chosen, please include a
$15 processing fee
Payment Enclosed
$_______________ Add $25 late registration after November 4th
Make checks
payable to North Jersey Section IEEE
Tuesday
Evenings,
Eight
weekly classes (October 11, 18, 25, November 1, 8, 15, 22, 29, 2005)
NJ
The North Jersey Section IEEE is offering an evening
course entitled "Project Management".
Dice.com lists 2500+ Project related jobs in the
The IEEE certificate of completion will be given to you when you
complete the course. You may wish to
take two Certification exams, one in Project Management administered by Project
Management Institute and the other in IT Project+ by CompTIA Inc.
Instructor: Donald Hsu, PhD, has
been a corporate manager for 11 years and is an experienced trainer. Since 1999, he has trained 270+ people in IT
Project+, MS Project 2003, and Project Management courses in seven
organizations.
TOPICS
1. Explain the need for a
project manager
2. Define SOW, PERT, GANTT, CPM,
and Scope of the project
3. Identify the team members,
resources and plan for the strategy
4. Calculate schedule, budget
variances, and monitor project progress
5. Manage changes, estimates,
and communications
6. Set a baseline, import tasks
from MS Excel, export Project files to MS Word
7. Create and modify custom
reports, templates and combination views
8. Share resources and create a
master plan loaded to Project Server
9. Approve updates and conclude
a project plan
10. Analyze Global E-Commerce and
present student Projects
Class size will be limited to
a maximum of 25 with a minimum of 15.
Early registration is recommended.
Phone reservations will NOT be accepted.
Reservations accepted after
WHERE: |
NJ |
WHEN: |
8 Tuesdays, October 11, 18,
25, November 1, 8, 15, 22, 29, 2005, |
COST: |
IEEE (& affiliate)
members $375; Non-IEEE members $475. |
CONTACT: |
Bhanu Chivukula (b.chivukula “AT” computer.org) |
REGISTRATION: Project Management
Please email details to b.chivukula “AT” computer.org and upon
confirmation, the address where to mail a check with details as described
under, would be replied (Checks payable to “
Name: / Mr. / Mrs. / Miss / Ms. /
_____________________________________________ _________________________________
ÿ Non-member Çemail addressÈ
ÿ IEEE Member Member
#:_________________________ Member
of _____________________________ technical society
Employer:___________________________________________________________________________________________________
Employer
Address:____________________________________________________________________________________________
___________________________________________________________________________________________________________
Home
Address:______________________________________________________________________________________________
___________________________________________________________________________________________________________
Business (day) telephone
#:___________________________________
Home telephone #:________________________________
Please enclose required fee
payable to: North Jersey Section IEEE
Registration status will be
mailed after
ÿ Tuition receipt will be mailed only if this box is checked Signature:___________________________________________
Seminar Objective
This 4 hour course will teach you how
to work with data within an Oracle Database using SQL and SQL*Plus.
Seminar Design Outline
• Principal features of the Oracle database
• Query and manipulate an Oracle database
using Structured Query Language
• Code sophisticated query operations such as
join, grouping, case and more
• Update data with insert, update, delete,
and merge operations
• Create database tables with the major
datatypes such as NUMBER, VARCHAR2
• Create B-Tree indexes to improve the
performance of query operations
• Query Oracle data dictionary tables such as
USER_TABLES
• Utilize transaction control statements such
as Commit, Rollback and Savepoint
• Create database objects such as tables,
views, indexes, synonyms and sequences
• Grant and Revoke object privileges
• Utilize SQL*Plus to query, update and
create database objects
• Use SQL*Plus scripting and report
generation features
About the Speaker
The speaker is scheduled to be Raj
Agarwal, DBA.
Time: TBA, September 2005.
Place:
TBA – see http://web.njit.edu/~ieeenj/
and upcoming Newsletters for updates.
Information:
see http://web.njit.edu/~ieeenj/
and upcoming Newsletters for updates.
Seminar overview
FPGA stands for Field Programmable
Gate Array. FPGAs are
becoming the de facto standard in digital design. They are found in control,
DSP and general purpose computing. They offer designers the ability to go to
layout before committing to the full design.
This seminar will introduce FPGAs and
provide a road map on how to learn and become productive in the use of
FPGAs. Development will be used by the
instructor to execute labs.
Seminar Design Outline
•
Introduction to FPGA
•
FPGA architecture
•
Xilinx Design Flow
Ä
Architecture Wizard and Pace
Ä
Global Timing Constraints
•
Synthesis Techniques
Ä
XILINX CORE Generator
Ä
Floorplanner: Effective Layout
•
FPGA Editor: Viewing and Editing a Routed
Design
Ä
HDL Bencher
•
FPGA Design Techniques
•
Synchronous Design Techniques
About the Speaker
Mr. Chibane Cherif, is a practicing
engineer, speaker and lecturer in telecommunications, wireless communication
and Voice Over IP technology, business and market issues.
Pre-requisite
Basic
Digital design
Time: TBA, September 2005.
Place:
TBA – see http://web.njit.edu/~ieeenj/
and upcoming Newsletters for updates.
Information:
see http://web.njit.edu/~ieeenj/
and upcoming Newsletters for updates.