PUBLICATION
OF THE NORTH JERSEY
SECTION OF THE INSTITUTE OF ELECTRICAL AND
ELECTRONICS ENGINEERS
Last Updated 3/3/10
March
2010
|
New!
|
= New
Announcement Not Published in Paper Newsletter
|
|
Update!
|
= Change to
Meeting Time, Location, or Other Details
|
IEEE
North Jersey Section
Back Issues
Back to top
March 2010
Volume 56, Number 8
Publication
No: USPS 580-500
“The
IEEE Newsletter” (North Jersey Section), is published monthly except June and
July by The Institute of Electrical and Electronics Engineers, Inc. Headquarters: 3 Park Avenue,
17th Floor, New York, NY
10016-5997. $1.00 per member per year (included in annual
dues) for each member of the North Jersey Section. Periodicals-class postage paid at New
York, NY and at additional mailing
offices. Postmaster send address changes
to: “The IEEE Newsletter”, 445
Hoes Lane, P.O. Box 1331, Piscataway, NJ
08855-1331. USPS 580-500 (ISSN 1076-3732).
NEWSLETTER
STAFF
Editor......................................... Keith
Saracinello
Business
Manager....................... Keith
Saracinello
k.saracinello
“AT” ieee.org (302) 683-7162
Deadline
for receipt of material is the 1st of the month
preceding the month of publication. All
communications concerning editorial and business matters, including
advertising, should be sent to the Business Manager via e-mail at k.saracinello
“AT” ieee.org or to The IEEE Newsletter, c/o Keith
Saracinello,
25
Messenger Ln,
Ringoes,
NJ
08551,
(302) 683-7162.
IEEE
NJ SECTION HOME PAGE
http://web.njit.edu/~ieeenj/
IEEE
NJ SECTION NEWSLETTER HOME PAGE
http://web.njit.edu/~ieeenj/NEWSLETTER.html
REPORT
ADDRESS CHANGES TO:
IEEE Service Center,
445 Hoes Lane, P.O. Box 1331, Piscataway,
NJ 08855-1331,
(732) 981-0060. It is not necessary to
inform the North Jersey Section when you change your mailing address. “The IEEE Newsletter” and other section
mailings use a list provided by IEEE’s national headquarters.
SECTION
OFFICERS
Chair................................................... Amit
Patel
a.j.patel
“AT” ieee.org
Vice-Chair-1............................. Dr.
Sanghoon Shin
s.shin
“AT” ieee.org (973) 492-1207 Ext. 22
Vice-Chair-2............................... Dr.
Naresh Chand
naresh.chand “AT”
baesystems.com (973) 636-7408
Treasurer.................................................. Vacant
Secretary......................................... Russell
Pepe
rcpepe
“AT” ieee.org (201) 960-6796
Members-at-Large:
Pete Donegan (doneganp “AT” ieee.org)
Dr. Katherine Duncan (kduncan
“AT” ieee.org)
Dr. Mengchu Zhou (zhou “AT” njit.edu)
The North Jersey
Section Executive Committee usually meets the first Wednesday (except holidays
and December) of each month at 7:00 PM. Meetings are open to all members. For information on meeting agenda contact
Secretary Russell
Pepe (201) 960-6796, rcpepe “AT” ieee.org.
Back to top
IEEE North Jersey
Section Activities
March 2010
Mar. 3 – “NJ Section Meeting”,
6:30 PM, “Executive Committee Meeting” - 7:00 PM, Clifton Public Library -
Allwood Branch, 44 Lyall Road, Clifton, NJ 07012. Russell Pepe at rcpepe “AT” ieee.org.
Mar. 10 – “Engineers
Meet: IEEE-USA – Engineering Supply and
Demand”, NJ PACE, 6:30 PM to
8:45 PM, Clifton
Memorial Library, 292 Piaget Ave,
Clifton, NJ. Paul Ward, (973) 790-1625, PWard1130 “AT”
aol.com, Richard F. Tax, (201) 664-6954, rtax “AT” aea.org.
Mar. 11 – “Deadlock-free
and Ratio-enforced Supervision of Automated Manufacturing Systems Using Petri
Nets”, by Hesuan Hu, NJ SMC
Society, 7:00 PM, New Jersey Institute of Technology (NJIT), Room 202, ECE
Center (Intersection between Warren & Summit Streets), Newark, NJ. Dr. Mike Liechenstein (973-471-0721) or
E-Mail: itsmikesju “AT” aol.com or zhou “AT” njit.edu. Please RSVP and check the electronic
newsletter for any changes.
Mar. 12 – “Arc
Flash Seminar” by Alton Baum, PE, NJ
PES/IAS, 9:00 AM to 2:00 PM, Automatic Switch Company, 50 Hanover Road, Florham Park,
NJ. Ronald W. Quade, PE,
(732) 205-2614 or rwquade “AT” ieee.org.
Mar. 13 - May 15 – “C#
.NET Programming” by Donald Hsu, PhD,
9:00 AM to 12:00 PM, Room: ECEC 202 , NJIT, 161 Warren Street, Newark,
NJ. Donald Hsu, yanyou “AT” hotmail.com.
Mar. 24 – “North
Jersey Spring 2010 Student Presentation Contest”, NJ Section, 6:00 PM, FDU, Teaneck, NJ. For more information contact northjerseysac
“AT” ieee.org or jignasa.ray “AT” ieee.org.
Mar. 24 – “Digital
Radiography” by Dr. Lucian A.
Kasprzak, NJ EDS/C&S
Chapters, 7:00 PM, New Jersey Institute of Technology (NJIT), Room 202, ECE Center
(Intersection between Warren & Summit Streets), Newark,
NJ. Dr. Richard Snyder (973) 492-1207
(RS Microwave), Dr. Edip Niver (973) 596-3542 (NJIT), or Dr. Durga Misra (973)
596-5739 (dmisra “AT” njit.edu).
Mar. 25 – “Brushless
DC Motors – More Knowledge Means Better Results” by Steven R.
Garfinkel, NJ Consultants' Network, 6:30-8:30 PM, Morris County Library, 30
East Hanover Avenue, Whippany, NJ. Robert
Walker, (973) 728-0344, or visit www.TechnologyOnTap.org.
Mar. 25 – “Greedy
Routing with Guaranteed Delivery Using Ricci Flow” by Professor Jie Gao,
NJ Communications Society, 11:30 AM, New Jersey Institute of Technology (NJIT),
Room 202, ECE Center (Intersection between Warren & Summit Streets),
Newark, NJ. Dr. Nirwan Ansari (973)
596-3670 (nirwan.ansari “AT” njit.edu) or Yanchao Zhang (973) 642-7817. Also check http://web.njit.edu/~ieeenj/comm.html for the latest updates.
Mar. 26 – “Small
Power Transformer Technical Seminar”
by Tommy Nunn and Jeffrey Wimmer, NJ PES/IAS, 9:00 AM to 2:00 PM, PSE&G -
Hadley Road Facility, 4000 Hadley Road, South Plainfield, NJ. Ronald W. Quade, PE,
(732) 205-2614 or rwquade “AT” ieee.org.
Mar. 26 – “Application
Deadline for IEEE WCET Certification Program”, North
Jersey Section. See www.ieee-wcet.org for more information.
Upcoming
Meetings
Apr. 6 – “Internal
Development of Test and Measurement Hardware for Wireless Infrastructure Applications” by Charles Jobbers, NJ
IMS, 6:30 PM, New Jersey Institute of Technology (NJIT), Room 202, ECE Center
(Intersection between Warren & Summit Streets), Newark,
NJ. Russell C. Pepe, 201-960-6796,
rcpepe “AT” ieee.org.
Apr. 6 - May 25 – “Project
Management” by George Sierchio,
6:30 PM to 9:00 PM, Room: ECEC
202 , NJIT, 161 Warren Street,
Newark, NJ. Donald Hsu, yanyou “AT” hotmail.com.
Apr. 7 – “NJ Section Meeting”,
6:30 PM, “Executive Committee Meeting” - 7:00 PM, Clifton Public Library -
Allwood Branch, 44 Lyall Road, Clifton, NJ 07012. Russell Pepe at rcpepe “AT” ieee.org.
Apr. 20 – “Professional
Networking Happy Hour”, NJ WIE, GOLD, SAC, 6:00-
8:00 PM, Dorrians’s, 555
Washington Blvd, Jersey City, NJ.
Jignasa Ray at jignasa.ray “AT” ieee.org.
Apr. 29 – “More
Assistance for Small High-Tech Businesses:
Resources and Grants from NJ COS&T” by Dr. Peter Reczek,
NJ Consultants' Network, 7:00 PM,
Olive Restaurant,
Parsippany Hilton, Parsippany,
NJ. Robert Walker, (973) 728-0344, or visit www.TechnologyOnTap.org.
May 2 – “NJ
Section Awards Reception” - 3:00 to 6:00 PM at the Birchwood Manor, 111 North Jefferson Rd, Whippany, NJ. Anne Giedlinski (973) 377-3175.
May 4 – “Outdoor
ITE-Global Deployment” by Don Gies, NJ IMS, 6:30 PM, Alcatel-Lucent, Building 5,
600 Mountain Avenue, Murray Hill, NJ. Russell C. Pepe, 201-960-6796, rcpepe “AT”
ieee.org.
May 12 – “Engineers
Meet: The Upside of Downsizing” by Diane Young, NJ
PACE, GOLD, 6:30 PM to
9:00 PM, Clifton Memorial Library, 292 Piaget Ave, Clifton, NJ. Paul Ward, (973) 790-1625, PWard1130 “AT”
aol.com, Richard F. Tax, (201) 664-6954, rtax “AT” aea.org.
Sep. 14 – “Selecting
the Appropriate Environmental Test Chamber for Renewable Energy Applications” by Mark R. Chrusciel,
NJ IMS, 6:30 PM, New Jersey Institute of Technology (NJIT), Room 202, ECE Center
(Intersection between Warren & Summit Streets), Newark,
NJ. Russell C. Pepe, 201-960-6796,
rcpepe “AT” ieee.org.
Members and Non-Members Welcome
PLEASE
POST
Back to top
NJ Communications Society:
Greedy Routing
with Guaranteed Delivery Using Ricci Flow
On Thursday, March 25, 2010, the IEEE Communications Society
will host a presentation titled “Greedy Routing with Guaranteed Delivery Using
Ricci Flow.” The speaker will be
Professor Jie Gao.
About the Topic
Greedy forwarding with geographical locations in a wireless sensor
network may fail at a local minimum. In
this talk, we propose to use conformal mapping to compute a new embedding of
the sensor nodes in the plane such that greedy forwarding with the virtual
coordinates guarantees delivery. In
particular, we extract a planar triangulation of the sensor network with
non-triangular faces as holes, and deform the network shape by using Ricci flow
such that all the non-triangular faces are mapped to perfect circles. Thus, greedy forwarding will never get stuck
at an intermediate node. The computation
of the conformal map and the virtual coordinates is performed at a
preprocessing phase and can be implemented by local gossip-style computation.
This is joint work with Xianfeng David Gu, Feng Luo, Rik Sarkar,
Xiaotian Yin, and Wei Zeng..
About the Speaker
Jie Gao is currently an assistant professor in the Department of
Computer Science at Stony
Brook University. She received a PhD from the Computer Science
department of Stanford
University in 2004, and
BS degree from the special class for the gifted young, University of Science
and Technology of China in 1999. She
works on algorithms, sensor networks, and computational geometry. She received NSF CAREER award in 2006, the
best paper award from Internet Measurement Conference 2009, and she is
currently an associate editor of ACM Transaction on Sensor Networks..
All
Welcome!
You do not have to be a member of the IEEE to attend.
Time:
11:30 AM, Thursday, March 25, 2010.
Refreshments will be offered at 11:15 AM.
Place: New Jersey Institute of
Technology (NJIT), Room 202, ECE Center (Intersection between Warren &
Summit Streets), Newark, NJ. Directions
are available at http://www.njit.edu/about/visit/gettingtonjit.php.
Information: Dr. Nirwan Ansari (973) 596-3670
(nirwan.ansari “AT” njit.edu) or Yanchao Zhang (973) 642-7817. Also check http://web.njit.edu/~ieeenj/comm.html for the latest updates.
Back to top
NJ Consultants’ Network:
Convert Your
Consulting Business into a Full-Fledged Engineering Company
Meeting rescheduled due to snow
On date TBA, the IEEE Consultants' Network of Northern NJ (www.TechnologyOnTap.org) will
present an informative talk, of great interest to all independent engineering
professionals. Dan Kamdar will discuss
how you can expand your one-man consulting business into a lucrative
Engineering Company.
About the Topic
Many consultants stay in a small practice and never fully realize the
potential of growing into a bigger business.
Some may prefer this as their personal choice.
However, if you want to turn your practice into a multi-million dollar
business, we highly recommend that you attend this talk. It will certainly spark your thinking.
Mr. Kamdar will describe how he joined CNNNJ about 10 years ago and
started his consulting company. Soon
thereafter, he embarked on a path of expansion of the business. His ‘Affordable Engineering Services, LLC’ is
nowadays a thriving company with about 275 employees. As he will explain, that accomplishment
requires a specific mindset.
About the Speaker
Dan Kamdar worked for Boeing as a Senior Engineering Manager, in charge
of a group of some fifty engineers.
After 25 years at Boeing he retired and started his own consulting
business. Dan, who is both an engineer
and a businessman, moved from California to New Jersey in 1997.
Mr. Kamdar earned MBA, MSEE, BSEE and BSME degrees from the California
State University and from the University of Michigan.
About the Consultants’ Network
Founded in 1992, the IEEE Consultants Network of Northern NJ encourages
and promotes the use of independent technical consultants by business and
industry.
All Welcome!
Free admission – members and non-members are welcome
Time: 6:00-8:30 PM, date TBA.
Place: Morris County Library, 30 East
Hanover Avenue, Whippany, NJ. Directions
to Library: www.mclib.info.
Information: For directions and up-to-date
meeting status, call Robert Walker (973) 728-0344 or visit our website at www.TechnologyOnTap.org.
Back to top
NJ Consultants’ Network:
Brushless DC
Motors – More Knowledge Means Better Results
On Thursday, March 25, 2010, the IEEE Consultants' Network of
Northern NJ (www.TechnologyOnTap.org) will
present Steven R. Garfinkel, Principal of Ellipsah LLC, who will discuss how
BLDC motors are constructed, their performance and how to select them.
About the Topic
Brushless DC motors are used in high performance servo systems. They are capable of high power output in a
given size, making them the motor of choice for weight- or size-sensitive
applications. When properly applied,
they are enormously robust.
This discussion will cover the basics of the construction of BLDC
motors. Without resorting to heavy math,
the basics of their design will be presented, to provide attendees with a more
complete understanding of how they work and what features to look for. Users of BLDC motors will be in a better
position to ensure they get a motor that will work from their supplier.
The primary components of a BLDC motor are the magnets, laminations,
insulation, commutation sensor and windings.
Each will be briefly discussed. A
systematic approach to the selection of a BLDC motor for a specific application
will be presented. If you have any
questions about how BLDC motor work, you will find the answers in this
presentation.
About the Speaker
Steven Garfinkel received his BSc and MEng in Electrical Engineering
from Rensselaer Polytechnic Institute in Troy, New York. He designed autopilots, flight control actuators,
rescue hoists, cargo winches and industrial tools over his career of more than
twenty five years. His company, Ellipsah
LLC, provides complete servo system design services, including custom motors
and controllers. Steven can be reached at sgarfinkel@ellipsah.com or at (973) 432-7401.
About the Consultants’ Network
Founded in 1992, the IEEE Consultants Network of Northern NJ encourages
and promotes the use of independent technical consultants by business and
industry.
All Welcome!
Free admission – members and non-members are welcome
Time:
6:30-8:30 PM, Thursday, March 25, 2010.
Place: Morris County Library, 30 East
Hanover Avenue, Whippany, NJ. Directions
to Library: www.mclib.info.
Information: For directions and up-to-date
meeting status, call Robert Walker (973) 728-0344 or visit our website at www.TechnologyOnTap.org.
Back to top
NJ Consultants’ Network:
More
Assistance for Small High-Tech Businesses:
Resources and Grants from NJ COS&T
The April 29, 2010 meeting of the IEEE Consultants' Network of Northern
NJ will feature a talk on assistance for small high-technology businesses
provided by the State of New Jersey Commission on Science and Technology.
The presenter, Peter Reczek, PhD, is the Executive Director of New
Jersey COS&T. He brings to this
position an extensive background in high-tech start-ups that he founded, as
well as in managing technology transfer and industrial-academic partnerships.
Dr. Reczek will highlight many of the state programs that foster growth
of small design or manufacturing businesses or benefit engineers in consulting
practices.
The meeting will take place on Thursday, April 29, 2010 at 7pm, in the
Olive Restaurant at the Parsippany Hilton.
More information will be available closer to the meeting date – in this
newsletter and on the CNNNJ Web site (www.TechnologyOnTap.org).
Back to top
NJ EDS/C&S:
Digital
Radiography
On March 24, 2010, the IEEE NJ Section Electron Devices, Circuits
and Systems Chapters together with the New Jersey Institute of Technology will
host a talk on “Digital Radiography."
The speaker will be Distinguished Lecturer, Dr. Lucian A. Kasprzak.
About the Talk
If you or someone you know has had an x-ray
recently, you may have discovered that things have changed in the radiology
department. Almost all the techniques
used today are digital. Some techniques
used in the radiology department of a hospital are digital by nature. As examples, Computed Radiography, Magnetic
Resonance Imaging and Computed Tomography come to mind. However, general radiography and mammography
were not digital as originally conceived.
These two types of medical radiography have gone through a transition in
the last 15 years, resulting in the displacement of x-ray film radiography by
digital devices. This change in media,
so to speak, allows radiologists to see images almost instantaneously. Further, the infrastructure is now in place
to quickly send these images literally around the world for analysis or second
opinion.
After a brief description of the x-ray film
technique, we will explore the digital technologies used in general radiography
and mammography. The image capture
technologies and their applications will be described with a focus on aspects
of resolution and detection. These
detectors use TFT
technology similar to that used in flat panel displays. Key attributes of the detector pixels, such
as, fill factor, modulation transfer function, detective quantum efficiency and
fixed pattern noise will be reviewed. In
addition, the components, materials and processes used in the fabrication of
these devices will be examined to lend perspective on their performance and
reliability. Finally, some practical
challenges for possible future improvement will be advanced.
About the Speaker
Lucian A. Kasprzak received the PhD degree in Solid State Technology
from the Materials Science Department of Stevens Institute of Technology in
1972, while on an IBM
Resident Fellowship. He received a BS in
Physics from Stevens in 1965 and an MS in Physics from Syracuse in 1970. He has worked, his entire career, on
reliability of semiconductor devices and ICs: from their inception as discrete
devices to ULSI. He discovered the hot
electron effect in short channel MOSFET devices in 1973 while at IBM, from which he retired in 1995. The past 14 years, he has been in the medical
device industry in various R&D organizations. He pioneered the creation of IEEE
transactions on Device and Materials Reliability and is on the Board of
Directors of the International Reliability Physics Symposium. Dr. Kasprzak is a Fellow of the IEEE.
All Welcome!
You do not have to be a member of the IEEE to attend.
Time: 7:00 PM, Wednesday, March 24, 2010. Free buffet will begin at 6:15 PM.
Place: New Jersey Institute of Technology (NJIT), Room 202, ECE Center
(Intersection between Warren & Summit Streets), Newark, NJ. Directions are available at http://www.njit.edu/about/visit/gettingtonjit.php.
Information: Dr. Durga Misra (973) 596-5739 (dmisra “AT” njit.edu), Dr. Edip Niver
(973) 596-3542 (NJIT), or Dr. Richard Snyder (973) 492-1207 (RS Microwave)..
Back to top
NJ
IMS:
Internal
Development of Test and Measurement Hardware for Wireless Infrastructure
Applications
On Tuesday, April 6, 2010, the IEEE North
Jersey Section of the Instrumentation and Measurement Society (IMS) is hosting
a talk entitled, “Internal Development of Test and Measurement Hardware for
Wireless Infrastructure Applications.”
The presenter will be Charles Jobbers, MTS, Andrew Corporation.
About the Talk
The cost pressures on commercial
infrastructure component manufacturers have forced organizations to explore
innovative solutions to reduce test costs.
For some manufacturers, viable options to address specific test and
measurement needs must be developed internally. Andrew Corporation decided to design our own
hardware to determine whether cost savings are possible while maintaining the
necessary performance criteria needed to test our commercial wireless
infrastructure hardware. Utilizing a
highly-focused, small development team and a straightforward goal to reduce
cost, we decided to develop a line of modular hardware that may be used by
R&D, reliability and production test and measurement needs. We have successfully developed an Arbitrary
Waveform Generator (ARB), Digital Upconverter, CW Signal Source and
Reflectometer that are used in Vector Signal Generators (VSGs) and Vector
Network Analyzers (VNA’s) which are currently in use throughout the
organization. Our work has resulted in a
significant reduction in our capital equipment expenditures as well as a new
product line which may be marketed as a lower cost alternate to the RF &
Microwave Test and Measurement industry.
About the Speaker
Charles D. Jobbers was earned his Bachelor’s Degree in Electronic
Engineering Technology from DeVry University in North Brunswick, NJ on June
2001. Later he received his Master’s Degree in Software Engineering from
Monmouth University in West Long Branch, NJ in May 2006. He is currently pursuing an MBA in Finance
from the same institution. He is
currently working as an Engineering Manager at Andrew Corporation for the last
6 years. Previously, he held titles of Test Engineer, Software Engineer, and RF
Engineer at Mitec Wireless, Inc based out of Montreal Canada.
All Welcome!
Free admission. Members and
non-members welcome.
Time: 6:30 PM, Tuesday, April 6, 2010. Free buffet will be provided at 5:30 PM.
Place: New Jersey Institute of Technology (NJIT), Room 202, ECE Center
(Intersection between Warren & Summit Streets), Newark, NJ. Directions are available at http://www.njit.edu/about/visit/gettingtonjit.php.
Information: Russell C. Pepe, 201-960-6796, rcpepe “AT” ieee.org.
Back to top
NJ IMS:
On Tuesday, May 4, 2010, the IEEE North Jersey
Section of the Instrumentation and Measurement Society (IMS) is hosting a talk
entitled, “Outdoor ITE-Global Deployment.”
The presenter will be Don Gies, MTS, Alcatel-Lucent Global Product
Compliance Laboratory.
About the Talk
This talk explores aspects of IEC 60950-1,
enclosure test standards (UL 50, CSA C22.2 No. 94, NEMA 250, IEC 60529, IEC
60950-22), and global electrical codes and wiring methods that impact outdoor
ITE, and provides insight on how to juggle, compromise, and reconcile conflicting
international requirements.
About the Speaker
Don Gies has been a Product Compliance Engineer for over 23 years. Since 1989, Mr. Gies has worked at
AT&T-Bell Laboratories/Lucent Technologies/Alcatel-Lucent as a Product
Safety Engineer, responsible for obtaining product safety certifications for
his company’s telephone and information processing equipment from domestic and
international product safety organizations.
Mr. Gies has become a leading subject matter expert for his company in
the field of global product safety compliance, working primarily with
Alcatel-Lucent's wireless base station equipment. Mr. Gies is a member of the Alcatel-Lucent
Technical Academy. Prior to working at
AT&T, Mr. Gies was a Tempest Engineer for Honeywell-Signal Analysis Center,
where he worked on various secure communications projects for the US Army
Communications -Electronics Command. Mr.
Gies, a lifelong resident of the Jersey
Shore, graduated from Rutgers University
- College of Engineering as an Electrical Engineer. He is an iNARTE Certified Product Safety
Engineer.
All Welcome!
Free admission. Members and
non-members welcome.
Time: 6:30 PM, Tuesday, May 4, 2010. Free buffet will be provided at 5:30 PM.
Place: Alcatel-Lucent, Building 5, 600 Mountain Avenue, Murray Hill, NJ 07974.
Information: Russell C. Pepe, 201-960-6796, rcpepe “AT” ieee.org.
Back to top
NJ IMS:
Selecting the
Appropriate Environmental Test Chamber for Renewable Energy Applications
On Tuesday, September 14, 2010, the IEEE
North Jersey Section of the Instrumentation and Measurement Society (IMS) is
hosting a talk entitled, “Selecting the Appropriate Environmental Test Chamber
for Renewable Energy Applications.” The
speaker will be Mark R. Chrusciel.
About the Talk
Properly defining your Environmental Chamber
requirements will insure your best return on investment. An emphasis will be placed on the renewable
energy markets, including a way to save up to 54% on your operating costs. Discussions on the effect of air flow on
product temperature and ensuring all DUT’s experience the same temperature
gradients will be reviewed. With most
solar panels carrying 20 year warranties, short cuts in testing could cost
significant warranty dollars or damage to your company’s reputation. The importance of safely processing hazardous
materials will also be discussed.
About the Speaker
Mark R. Chrusciel has approximately 30 years of experience with
environmental chambers and ovens and currently serves as Director for
Cincinnati Sub Zero. His many years of
experience in the quality, reliability and laboratory markets enables him to
design, select and implement the proper thermal processing equipment for the
application. Mark has a BS in Natural
Sciences from Xavier University; has served on the board for the last 4
years of the ASTR conference (Accelerated Stress Test and Reliability); and is
a senior member of the Institute
of Environmental Science
and Technology (IEST).
All Welcome!
Free admission. Members and
non-members welcome.
Time: 6:30 PM, Tuesday, September 14, 2010. Free buffet will be provided at 5:30 PM.
Place: New Jersey Institute of Technology (NJIT), Room 202, ECE Center
(Intersection between Warren & Summit Streets), Newark,
NJ. Directions are available at http://www.njit.edu/about/visit/gettingtonjit.php.
Information: Russell C. Pepe, 201-960-6796, rcpepe “AT” ieee.org.
Back to top
NJ Section PACE:
Engineers
Meet:
IEEE-USA – Engineering
Supply and Demand
On Wednesday, March
10, 2010 the North Jersey Section Professional Activities Committee will meet
to discuss IEEE-USA’s influence on the Manpower Supply/Demand Ratio. Do they help or hinder? Stop in for an informative discussion with
Pizza, & refreshments. Bring your
friends and associates.
About the Meeting
This
meeting will provide members of the Profession
with an opportunity to discuss IEEE-USA’s involvement and influence over the Supply of
engineers. More about this subject
listed in the “PACE News” column in this Newsletter.
These
meeting’s provide the means to reach other engineers and IEEE members. Historically, once members get to our
meetings they just don’t want to leave.
Our meetings are entertaining and thought provoking.
All are
invited. We encourage North Jersey
Section Ex-Com officers to attend. When
they do, our Section membership can meet with them on a first name basis.
Bring your
associates, friends and spouses.
All Welcome!
Members and students from all professional societies and engineering
disciplines are welcome. We now have attendees
from IEEE, ASME, NSPE, ASCE and AEA. For
information about these groups see:
www.aea.org
www.ieeeusa.org/policy/care
www.ieeeusa.org
www.programmersguild.org
http://web.njit.edu/~ieeenj/
www.asme.org/sections/northjersey
CARE is the
Congressional Advocacy Recruitment Effort CARE
is a voluntary network of IEEE members who are interested in public
policy. To help and for information go
to www.ieeeusa.org/policy/care/.
Time:
6:30 PM to 8:45 PM, Wednesday, March 10, 2010. Refreshments will be served.
Place: Clifton Memorial Library, 292
Piaget Ave, Clifton, NJ, (973) 772-5500.
Information: Paul Ward, (973) 790-1625, PWard1130
“AT” aol.com, Richard F. Tax, (201) 664-6954, rtax “AT” aea.org.
Back to top
NJ Section PACE, GOLD:
Engineers
Meet:
The Upside of Downsizing
On Wednesday, May
12, 2010 the North Jersey Section Professional Activities Committee and
Graduates of the Last Decade will host a meeting to host a meeting to discuss
the “The Upside of Being Downsized.” Our
speaker will be Diane Young.
About the Meeting
If you have
been downsized or fear that you may be, then you will want to attend this
informative and thought-provoking seminar.
You will
learn: How to turn a challenge into an
opportunity by changing your outlook.
Through
experiential exercises, how to set and achieve goals. Tips on how to survive and thrive in a down
economy.
This is a
discussion group that is designed to be fun and interactive. Handouts will be given so you may apply what
you have learned long after the seminar has ended.
About the Speaker
Diane Young is a certified professional coach who focuses on both
relationship and career transition coaching.
She completed her studies at the Institute for Professional Excellence
in Coaching (iPEC), a renowned training program accredited by the International
Coach Federation (ICF).
The LYF Experience is the name of Diane’s coaching practice and LYF
stands for Love Yourself First. Diane
has learned that success begins with self-love and self-acceptance. She works closely with her clients to help
them let go of self-defeating thoughts and behaviors, discover their potential,
take action and achieve their personal and career goals.
In response to this challenging economic climate, Diane founded and
facilitates a support and networking group called The Unemployed Optimists
where participants can connect and feel inspired and motivated during their
transition. Feature stories on this
group have appeared in The Record, The Star Ledger and Herald News and on News
12 NJ.
Diane’s practice includes individual, couples and group coaching. She may be reached at diane@thelyfexperience.com.
All Welcome!
Members and students from all professional
societies and engineering disciplines are welcome. We now have
attendees from IEEE,
ASME, NSPE, ASCE and AEA. For
information about these groups see:
www.aea.org
www.ieeeusa.org/policy/care
www.ieeeusa.org
www.programmersguild.org
http://web.njit.edu/~ieeenj/
www.asme.org/sections/northjersey
CARE is the
Congressional Advocacy Recruitment Effort CARE
is a voluntary network of IEEE members who are interested in public
policy. To help and for information go
to www.ieeeusa.org/policy/care/.
Time:
6:30 PM to 9:00 PM, Wednesday, May 12, 2010. Refreshments will be served.
Place: Clifton Memorial Library, 292
Piaget Ave, Clifton, NJ, (973) 772-5500.
Information: Paul Ward, (973) 790-1625, PWard1130 “AT”
aol.com, Richard F. Tax, (201) 664-6954, rtax “AT” aea.org.
Back to top
NJ SMC Society:
Deadlock-free and
Ratio-enforced Supervision of Automated Manufacturing Systems Using Petri Nets
On Thursday,
March 11, 2010, the NJ Systems, Man & Cybernetics (SMC) Chapter will be
hosting a seminar on “Deadlock-free and Ratio-enforced Supervision of Automated
Manufacturing Systems Using Petri Nets.”
Mr. Hesuan Hu, a visiting PhD student in New Jersey Institute of
Technology, will be the presenter.
About the Talk
In automated manufacturing systems (AMSs), Petri nets are widely adopted
to solve the supervisory control problems.
Among them deadlock-freeness and fairness constitute two important
parts. The former ensures no occurrence
of deadlock situations so as to inhibit the emergence of the partial or
complete blockage of the processing of jobs.
The latter ensures a reasonable regulation scheme for orderly resolution
such that a desired ratio can be achieved among different processes. This work proposes an efficient method for
designing the supervisors, which are based on the invariance property of Petri
net models of AMSs. A novel approach is
proposed to iteratively produce empty siphons as the solutions of a set of
linear inequalities. We show that the
implementation of these two supervisors can be separately performed. The applicability of these results is
illustrated through examples. Comparison
with the previous work is presented to demonstrate the advantages of the
proposed approach.
About the Speaker
Hesuan Hu received the BS and MS degrees from Xidian University, Xi’an,
P. R. China, in 2003 and 2005, respectively.
He is currently working towards the PhD degree at Xidian
University. Since 2008, he has been a
research scholar in the Electrical and Computer Engineering Department, New
Jersey Institute of Technology, Newark, where he has also served as an Adjunct
Professor in charge of two graduate courses since 2009. From 1997 to 2000, he was an Assistant
Engineer at the Metrology Department of Xi’an Aircraft Engine Control
Engineering Co., Ltd., where he was appointed as the Director of the Electrical
and Electronic Laboratory from 2001 to 2002.
His research focuses on Petri nets and their application, automated
manufacturing systems, resource allocation systems, and discrete event systems. In the above areas, he authored or
co-authored 40 papers on various peer-reviewed journals or conferences
including a number of IEEE Transactions.
Also, he is an active reviewer for more than 10 prestigious
international journals as well as many conferences. Since 2008, he has served as a program
committee member for several conferences.
All Welcome!
You need not be a member of IEEE to attend, and there is no charge for
admission.
Time:
7:00 PM (light refreshments at 6:45 PM), Thursday, March 11, 2010.
Place: New Jersey Institute of Technology (NJIT), Room 202, ECE Center
(Intersection between Warren & Summit Streets), Newark, NJ. Directions are available at http://www.njit.edu/about/visit/gettingtonjit.php.
Information: Paul Ward, (973) 790-1625, PWard1130
“AT” aol.com, Richard F. Tax, (201) 664-6954, rtax “AT” aea.org.
Back to top
North Jersey
Spring 2010 Student Presentation Contest
The Spring 2010 Student Presentation Contest is coming up! The North Jersey Section will be holding a
presentation contest scheduled for March 24, 2010, for undergraduate and
graduate students. This contest has been
held in years past. Its overwhelming success in generating student
participation and interest make it a fantastic event for up and coming
engineers. This year's contest will
feature similar prizes ($$$) and have graduate and undergraduate categories.
The main focus of the presentation contest is to give students an
opportunity to sharpen their communication skills, and help prepare for real
life situations as practicing engineers and researchers. Additionally, the
North Jersey Section contest provides an excellent chance for students to
practice for the Region I Student Paper contest in Spring.
The contest at the North Jersey Section level is also supplemented by
awarding cash prizes to the three best presentations in both graduate and
undergraduate categories. All
engineering students are encouraged to participate in submitting team or
individual presentations on any project work related to engineering. This local contest does not require students
to write a full paper, just a slide-based presentation on technical or
non-technical work is sufficient. Senior
design projects, lab projects, personal engineering hobbies, engineering
policy, etc., are great topics to submit.
Moving onto the regional contest requires submitting a short written
paper.
The details of contest rules, judging criteria, viable topics for
presentations, and abstract form will be same as last year. Also, if you would like to get an idea of
what topics would be appropriate or how you can prepare your abstract, take a
look at winners from past years at the NNJ IEEE SAC homepage archive.
This year's North Jersey Section Contest will be open to graduate and
undergraduate students and first/second/third place prizes will be awarded in
each category of $100/$75/$50. All participants MUST REGISTER by submitting an
abstract by filling in the form available at the SAC website to qualify as a
contest participant.
Time:
Starting at 6:00 PM with dinner at 5:30 PM, Wednesday, March 24, 2010.
Place: FDU, Teaneck, NJ
(http://www.fdu.edu/visitorcenter/directions/teaneck_map.html).
Information: Dr. Mike Liechenstein
(973-471-0721) or E-Mail: itsmikesju “AT” aol.com or zhou “AT” njit.edu. Please
RSVP and check the electronic newsletter for any changes.
Back to top
IEEE WCET Certification Program
Examination
to be held from April 11 to May 8, 2010
New
Training Programs Launched to Help Candidates Prepare for the Exam &
Provide
Comprehensive Knowledge of the Wireless Field
The IEEE Communications Society (IEEE ComSoc), the
leading worldwide professional organization dedicated to the advancement of
communications technologies, will hold the Spring examination period for the
IEEE Wireless Communication Engineering Technologies (IEEE WCET) Certification
Program from 11 April to 8 May 2010. The
application deadline for this upcoming exam cycle is 26 March 2010. Additional details including program and
application information are available at www.ieee-wcet.org.
Back to top
PACE News
By Richard F. Tax
IEEE to increase Engineer Supply/Demand Ratio
“The E2 Education Act would help states
introduce engineering to students as regular parts of the science
curriculum. The bill provides the states
grant money to develop curriculums that introduce engineering and engineering
concepts to students. The bill then provides further grants to implement
those curriculums.”
Are you worried about the declining number of American students who are
majoring in Engineering or the STEM professions?
IEEE-USA has sent the following to our membership to solicit their
support for The E2 Education Act. However, is this in the best interest of the
Profession or our students? How will
this affect the Engineering manpower Supply/Demand ratio? High is bad for the Engineering professional,
and low would be better. It looks like
another money issue where cheap is better.
IEEE-USA
wrote,
under the Subject line: “Help IEEE-USA
Reform Science Education”
“IEEE Member:
We
have a unique opportunity to change the way science and engineering are taught
in the Untied States - if we act quickly.
A
bill will soon be introduced into Congress that would help states add
engineering to their basic science curriculums at the K-12 level. If passed, the bill would be a significant
reform to our STEM education system. The
bill will introduce all students to engineering much earlier in their academic careers
than we do currently. It will also
encourage students to continue their science educations through high-school, a
time when many American students abandon the hard sciences.
While
the bill has support in Congress, it needs more. We need to explain to our elected officials
exactly what the bill is and what it does.
Most importantly, we need to convince Congress that this issue is
important enough for them to focus on it.
To
do this, IEEE-USA is inviting all IEEE members to come to Washington on February
8 and 9 to discuss the bill with your elected leaders.
Full
details are here: http://www.ieeeusa.org/policy/careerflyin/default.asp
If
you are interested in education reform, concerned about how America is
educating our future engineers, or worried about the declining number of
American students who are majoring in STEM fields, this is your opportunity to
make a difference. Please join IEEE-USA
on February 8 and 9 to explain this problem, and this solution, with
Congress. Register
today!”
That sums up this effort toward increasing the supply of engineers, but
we know their will be more.
See the involvement on the National Engineers Week (NEW) effort. Hey, little girl, want a cookie? You will see it when you get there.
http://www.eweek.org/EngineersWeek/Introduce.aspx?ContentID=28.
LETTER
With concern about the Supply/Demand Ratio, I sent the following, dated
November 28, 2009, to our IEEE-USA presidents.
I never did receive a reply.
Here is the letter:
To Gordon W. Day, Ph.D, Russell Lefevre, Ph.D, Evelyn H. Hirt. John Vig
November 28, 2009
I am the PACE chair for the North Jersey, IEEE, Section and the
Metropolitan Section’s Activities Council (METSAC). PACE is the acronym for Professional
Activities Committee for Engineers.
I would like to prepare a Year End report for these two entities. We all have access to “The Institute” and
“Spectrum”, but I see little to address the bread and butter issues facing our
American Engineers.
What has IEEE-USA done during 2009 to enhance the profession for our
engineering practitioners? Please note,
I mentioned engineering practitioners (working engineers) and not
academics. These two groups seem to have
conflicting interests and goals.
I am interested in your efforts to address the Supply/Demand Ratio and
enhancement of the job market for engineers.
Are IEEE-USA’s efforts having a positive or negative affect on the S/D
ratio? I see as a goal the reduction of
the S/D ratio i.e. reducing the supply and increasing the demand for our
American Engineers.
Regards,
Richard F. Tax
North Jersey Section. PACE chair.
METSAC PACE Chair
See http://www.aea.org/documents/tax/htri_file.pdf
While IEEE-USA wrote “While the bill has support
in Congress, it needs more.”
No it doesn't need more support; it needs opposition. This bill provides federal funding to expand
the K-12 education and seduce our youth into engineering.
Perhaps it is time to get rid of IEEE-USA and IEEE leaders responsible
for this activity.
In conclusion, I believe IEEE-USA and IEEE are and have been acting to
increase the supply of Engineers with total disregard for the profession or
demand for our engineering members.
Supporting IEEE-USA and these efforts is detrimental to the career of
all practicing engineers. It is also
harmful to our young students. I know
and respect the staff at IEEE-USA.
Unfortunately, they can only do what they are told to do. Compare them to www.aea.org.
Back to top
Introduction
of Region 1 Student Activities Leadership and Upcoming Region 1 Student
Competitions
Thank you for all your
efforts in keeping your IEEE Student Branch active and I hope it has been a
good year for providing activities for your student members. My name is Ms. Jignasa Ray and I have been
appointed the 2010-2011 Region 1 Student Activities Chair. The Region 1 Student Activities Committee is
comprised of myself, Briana Morey (student representative until May 2010),
Stephen Callender (R1 Southern Area SAC Coordinator), Section SAC Chairs,
Student Branch Chairs and Advisors and most importantly YOU, the student
members. We are also joining efforts
with the Region 1 GOLD, WIE, PACE, SPAC, HTC and MD to provide more student
activities, competitions and seminars.
We would like to extend our support to you for your IEEE Student Branch
local activities and participation in the upcoming Region 1 student
competitions and events.
Our role is to try to
keep you connected to IEEE as a local, northeastern US, and international
organization, make sure you're aware of all the resources IEEE has for you that
may make running your student branch a little easier, and help you in any other
way we can. We all have diverse
experience in volunteering with the IEEE and look forward to working with you
to make the R1 Student Branches more active and raise awareness of Student IEEE
membership benefits in the coming years.
Please visit the Region 1 SAC website (http://ewh.ieee.org/reg/1/sac/) for more information about us and the
student activities in Region 1 as well as our Region website at http://www.ieee.org/r1 for general IEEE member information and
resources.
We also want to inform
you of the upcoming joint Region 2/Region 1 Student Congress on April 17, 2010
at Temple University
- Philadelphia, PA.
There will be a number of exciting competitions, including the micromouse
competition, paper contest, ethics contest, brown bag and t-shirt
competition. Details on the competitions
are available at: http://www.temple.edu/students/ieee/SAC/compititions.html. This
will be a great opportunity to meet engineers and students from other
schools. For registration guidelines,
please visit the Region 1 SAC website (http://ewh.ieee.org/reg/1/sac/).
We hope you have
completed your annual reporting and submitted the officer information to the
IEEE. Please e-mail me if you need any
assistance in completing your branch annual reports or if there is a change in
your Student Branch leadership and/or Advisors so that we may keep you informed
of upcoming conferences, competitions and student activities. If you're looking for speakers in your area,
have a problem with your student branch you're not sure how to solve, are
looking for events to run, or have any other issues, please do not hesitate to
contact us. We're here to help! Hope to see you at the conference!
Jignasa Ray, PE
R1 SAC Chair
jignasa.ray “AT” ieee.org
Briana Morey
R1 Student
Representative
briana.morey “AT” ieee.org
Stephen Callender, PE
R1 Southern Area SAC
Coordinator
stephen.callender “AT” nyct.com
Back to top
Future
City Regional Competition
http://web.njit.edu/~ieeenj/Future_City_2010_03.pdf
Back to top
Elevate to Senior Member Grade!
To get information and
an application to advance to Senior Member Grade, see http://www.ieee.org/web/membership/senior-members/. For
further information or to find potential references, contact Mario Ogava,
Membership Chair, at m.ogava “AT” ieee.org.
Back to top
North Jersey Section Seeks Committee Chairs
and Volunteers
The North Section is seeking new volunteers to help conduct business for
the benefit of its membership. There are
a variety of volunteer positions open and available. They range from long-term to short-term, from
technical to non-technical, leadership or just participatory. For Society Chapter Chairs, you must be a
member of the corresponding IEEE Society.
You must be an active IEEE member to hold an elected office at the
section level.
If you would like to become involved with volunteering in some of these
efforts or positions or just become more informed about what is happening at
the North Jersey Section, please contact Dr. Chandra Gupta at c.gupta “AT”
ieee.org. You are welcome to attend the
Section business meeting held the first Wednesday of every month to find out
more and other volunteer activities that require some help.
Some committees needing volunteers include the following. Please contact the person indicated for
additional information.
· Power Electronics Society Chapter Chair - contact c.gupta below.
· GOLD (Graduates of the Last Decade) Affinity Group Volunteers and
Committee members needed - contact northjerseygold “AT” ieee.org
· WIE (Women in Engineering) Affinity Group Volunteers and Committee
members needed - contact kduncan “AT” ieee.org
· EMBS (Engineering in Medicine and Biology Society) is seeking a chair
and active committee volunteers - contact c.gupta “AT” ieee.org.
· Membership Development Committee Chair and Volunteers - contact c.gupta
below.
· Student Activities Committee volunteers and committee members needed -
contact jignasa.ray “AT” ieee.org.
Additionally, if interested volunteers would like to get more general
information about the Section, including a complete listing of all chapters and
committees, visit the North Jersey Section website http://web.njit.edu/~ieeenj/, or contact Dr. Chandra Gupta c.gupta “AT” ieee.org.
Back to top
Region 1 Award Nominations
Nominate a colleague.
Region 1 of IEEE offers a variety of awards to recognize the engineering
accomplishments of members. Specific award
categories include: technological innovation, engineering organization,
academic teaching, enhancement of IEEE image in the public or industry and
sustained IEEE service. To obtain
additional information about these categories visit the Region 1 website
www.ieee.org/r1
Once at the site click on Section Information on the
far right column. On the Section page
click on Region 1 Awards Information. We
will assist you. To nominate a qualified
individual prepare a 200-word summary (including the individual’s name, IEEE
number and IEEE US postal mail address) specifying the accomplishment of the
candidate.
Send the summary to our Awards Chair Ken Oexle, 11 Deerfield Road, Whippany, NJ 07981, prior to May 1.
The North Jersey Awards Committee will review the summary; suggest any
changes; complete the nomination form; and forward it to the Region 1 Awards
committee with a Section endorsement.
Award nominations are evaluated and approved at the Region 1 Summer
Meeting and plaques are presented at the following North Jersey Section Annual
Awards Reception.
Back to top
From the North
Jersey Section’s Education Committee:
Hot courses can enhance your position in the job market
IEEE North Jersey
Education Committee ran programming and management courses since 1993. 236 IEEE members and non-members completed
these courses. Benefits: Some got jobs at AT&T and Microsoft
Corporation.
We need hot
courses, instructors and classrooms. If
you can teach a hot course (any course that can get people jobs), email your
one-page abstract and your resume. If
your NJ firm can provide a conference room, evening or Saturday morning,
contact Donald Hsu, Chair, yanyou “AT” hotmail.com. Thank-you and act NOW!
Back
to top
TCF-2010
The 35th Annual
Trenton Computer Festival (TCF) will be held Saturday & Sunday, April 24th
& 25th, 2010 http://www.tcf-nj.org.
The TCF IT
Professional Conference is Friday April 23rd.
New this year, the
ARRL NJ Amateur Radio Convention is being held coincident with the festival, on
Sunday April 25th, all at The College of New Jersey, Ewing, New Jersey.
This year we are
focusing on Open Source Software, but we are still interested in covering all
topics relating to computers and digital technology. As 2010 is our 35th year, we are also seeking
talks that deal with the history of PCs and their impact on society. We are looking for talks (50 minutes) and
tutorials/workshop (100 minutes) on all forms of computer, digital electronics,
information, communications technology, robotics, home/environmental control,
Vid/Podcasting, gaming and digital home entertainment, digital photography,
wireless technology, networking.
If you have an idea
for a talk or workshop/tutorial for TCF, please fill out a Speaker Application
form at http://tcf-nj.org/speaker_registration.html.
If you are
interested in more information, or in speaking at the other related
events. For the IT Professional
Conference contact David Soll at dsoll@Omicron.com. For the Amateur Radio Conference contact Gary
Wilson at k2gw@optonline.net. For TCF in general, contact
Allen Katz, TCF Program Chairperson, a.katz@ieee.org, telephone:
609-771-2666, fax: 609-631-0177, US Mail: Dr. Allen Katz, School of
Engineering, The College of New Jersey, PO Box 7718, Ewing, NJ 08628-0718.
Back
to top
The 33rd IEEE Sarnoff Symposium 2010
http://ewh.ieee.org/r1/princeton-centraljersey/2010_Sarnoff_Symposium/
Back
to top
Call for
Papers - LISAT2010
http://ewh.ieee.org/conf/lisat/cfpLisat2010rev5.pdf
Back
to top
Professional Networking Happy Hour
Back
to top
IEEE Awards
Reception
North
Jersey Section
May 2, 2010
Birchwood
Manor, Whippany NJ
A time to relax, unwind and
enjoy --
A time to pay tribute to
our new Fellows --
A time to honor our Award
Winners --
YES it's time for the
Annual Section Reception
The Annual Section IEEE Awards Reception
will be held at the Birchwood Manor, 111
North Jefferson Road,
Whippany again this year. The affair is
scheduled for Sunday, May 2, 2010 from
3 to 6
PM. Tickets are $35.00
each. Spouses and guests are
welcome. We are limited to 90
attendees, so please make your reservations early.
Reservations are required by
April 24, 2010.
Complete the reservation form and return it with your payment. If you would like tickets mailed back to you,
please enclose a self-addressed stamped
envelope. Otherwise, your tickets will
be held at the door for you. If any
additional information is required concerning the reception, contact Anne
Giedlinski at (973) 377-3175.
---------------------------------------------------------------------------------------------------------------------
Use this form for Reception
reservations. ENCLOSE A
SELF-ADDRESSED STAMPED ENVELOPE to receive tickets in advance. Reservations are required by April 24, 2010. Mail reservation request to:
Anne
Giedlinski
299 Brooklake Road
Florham Park, NJ
07932
Enclosed is __________ for ____ ticket(s) at
$35.00 each (make check payable to North Jersey Section IEEE)
for:
NAME:
___________________________________________________________________
ADDRESS: _______________________________________________________________
_______________________________________________________________
Yes,
please send me directions to the Birchwood Manor
Back
to top
NJ Power & Energy Society/Industry Applications
Society
Small Power Transformer Technical
Seminar
The PES and IAS Chapters will sponsor a technical
seminar on the topic of medium voltage small power transformers. The session will be held on Friday, March 26,
2010 at PSE&G’s Hadley Road Facility, 4000 Hadley Road, South Plainfield,
NJ.
Topics
The seminar will cover the basics of design and
product selection of small power transformers for power distribution systems
for industrial and commercial facilities.
The seminar will focus on the selection of the various types of small
power transformers, and how to configure the systems to provide the proper
level of reliability based on available project funding:
|
ü
Comparison of Transformer
Technologies, Dry Type and Liquid Filled Transformers
ü
Transformer Overload
Capability and System Coordination
ü
Transformer Thermal
Characteristics
ü
ANSI C57.12.96 and
C57.12.92
ü
ANSI Test Requirements
ü
DOE National Efficiency
Standard
|
ü
Fluids: Oil, Less
Flammable, Biodegradable
ü
Total Ownership Costs:
ü
New Equipment Developments
ü
Acquisition &
Commissioning Costs
ü
Operations / Energy Costs
ü
Operations / Maintenance
Costs
ü
Life Cycle / Retirement
Cost
|
About the Instructors
The instructors will be Tommy Nunn and Jeffrey Wimmer,
ABB.
Tommy Nunn has a BS degree in Electrical Engineering
and comes to us with 31 years experience in the medium voltage power equipment
industry specializing in Small Power Transformers. His experience in the industry includes ITE,
Gould, Brown Boveri Corporation, PEMCO and presently he is the Marketing
Manager for ABB’s North American Dry Type Transformer Division.
Jeffrey Wimmer MS/MBA studied both engineering and
management, and is a certified substation maintenance engineer with experience
in the medium voltage power equipment industry specializing in Small Power
Transformers. His experience in the
industry includes the US Air Force, Virginia Transformer Corp., AVO/Megger,
North American EPC’s, and currently he is the Senior Marketing Representative
in Business Development for ABB’s North American Dry Type Transformer Division.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The registration fee for this seminar will be $150 for
non-IEEE members, $100 for IEEE Members, $75 for GOLD Graduates (last 1-10
years) and $25 for students with valid ID.
The fee will be waived for IEEE Life Member Grades with verification at
the seminar. The seminar fee includes
lunch, refreshments and handouts.
Non-members joining IEEE within 30 days of the seminar will be rebated
50% of the IEEE registration charge.
If desired, IEEE Continuing Education Units will be
offered for this course - a small fee of $25 will be required for
processing. A total of 0.4 CEUs will be
offered. Please indicate if desired
below.
|
Time:
|
9:00 AM to 2:00 PM (lunch is included), Friday, March 26, 2010.
|
|
Place:
|
PSE&G
- Hadley Road Facility, 4000 Hadley Road, South Plainfield, NJ 07080-1192h
|
|
Directions:
|
Route 287
to Exit 5
If
Southbound make right onto Stelton Road; If Northbound make left onto Stelton Road
Make
first left onto Hadley Road
Pass the
two lights and building is on the left; look for PSE&G sign on left.
|
|
Information:
|
Ronald W. Quade, PE, (732) 205-2614 or
rwquade “AT” ieee.org
|
______________________________________________________________________
Registration: Small Power Transformer Seminar 3/26/2010
Register via US mail to: Ronald W. Quade, PE
Eaton
Electrical
379
Thornall St, 8th Floor
Edison, NJ 08837
Name______________________________________________________________________________
Address____________________________________________________________________________
Phone__________________
Email______________________________________________________
IEEE #_________________
Student @______________________ Non IEEE_____ Life Member______
Continuing Education Units: Yes $25 No
If CEUs are chosen,
please include a $25 processing fee
Payment Enclosed
$_______________
Make checks payable to North Jersey Section
IEEE (Credit Cards cannot be processed at this time).
Back
to top
NJ Power & Energy Society/Industry Applications
Society
Arc Flash Seminar
Rescheduled for March 12, 2010, due to snow
The PES and IAS
Chapters will sponsor a technical seminar on the topic of arc flash. The session will be held on Friday, March 12, 2010, at Automatic Switch Co., 50 Hanover Rd, in Florham Park, NJ.
Topics
Arc Flash:
|
ü Intro/Recap
of Arc Flash – concern, standards, etc.
ü The
“Compliance” Process
ü Limits of
Approach
ü NFPA 70E-2009
– highlighting changes to 70E-2004
ü Review of
Hazard Risk Categories and PPE
descriptions
ü IEEE
1584-2002 – overview, what’s ahead
ü Arc Flash
Study – including typical results / recommendations
ü Incident
Energy Equations – a comparative analysis
|
ü Using the 70E
Tables vs. 1584 Equations
ü NESC 2007
ü Coordination
vs. Arc Flash
ü Labeling
ü Your
Electrical Safety Program – considerations
ü Your Electrical
Safety Program – keeping it EVERGREEN
ü Technical
Concerns from the Practitioner
ü Latest
Industry Practices
|
About the Instructor
The speaker will be Alton Baum, PE
from AB Engineering, LLC. Mr. Baum
carries over 20 years of utility generation and industrial power systems
experience working for Westinghouse, Eaton Electrical, and Square D.
After starting his career as a field engineer in large generators/excitation,
Mr. Baum focused in the area of power systems analyses, power quality
investigation/solution, and, most recently, arc flash analysis. In 2007,
Mr. Baum started an independent engineering consulting practice, AB
Engineering, LLC, which provides power engineering services to the
industrial/commercial markets. He has performed hundreds of short
circuit, overcurrent coordination, and arc flash studies, and has been teaching
in these areas for most of his career.
Mr. Baum holds the BS degree in Electrical Engineering from West
Virginia Institute of Technology (1987), the Master of Business Administration
from Widener University (1998), and the MSEE in Power Engineering from Drexel
University (2003). He is a member of IEEE, board member of the Delaware
Valley Power Quality Group, and holds Professional Engineer licenses in
multiple states.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The registration fee
for this seminar will be $150 for non-IEEE members, $100 for IEEE Members, $75
for GOLD Graduates (last
1-10 years) and $25 for students with valid ID.
The fee will be waived for IEEE Life Member Grades with verification at
the seminar. The seminar fee includes lunch,
refreshments and handouts. Non-members
joining IEEE within 30 days of the seminar will be rebated 50% of the IEEE
registration charge.
If desired, IEEE
Continuing Education Units will be offered for this course - a small fee of $25
will be required for processing. A total
of 0.4 CEUs will be offered. Please
indicate if desired below.
|
Time:
|
9:00 AM to 2:00 PM (lunch is included), Friday, March 12, 2010.
|
|
Place:
|
Automatic
Switch Company, 50 Hanover Road, Florham Park, NJ 07932
(973-966-2000)
|
|
Directions:
|
From
Route 80 Take I-287 to Exit 37 (NJ 24 East - Springfield). Take NJ 24 East to Exit 2B (Columbia
Turnpike). Proceed 2.2 miles to
Hanover Road (6th set of traffic lights).
Turn left on Hanover Road (AAA Building). Automatic Switch will be on the right (0.4
mile). Enter first driveway-marked
shipping/receiving and proceed to visitor parking lot on the left. Follow sidewalk to office entrance door.
|
|
Information:
|
Ronald W. Quade, PE, (732) 205-2614 or rwquade “AT” ieee.org
|
______________________________________________________________________
Registration: Arc Flash Seminar 3/12/2010
Register via US mail to: Ronald W. Quade, PE
Eaton
Electrical
379
Thornall St, 8th Floor
Edison, NJ 08837
Name______________________________________________________________________________
Address____________________________________________________________________________
Phone__________________
Email______________________________________________________
IEEE
#_________________ Student @______________________ Non IEEE_____ Life
Member______
Continuing Education Units: Yes $25 No
If CEUs are chosen,
please include a $25 processing fee
Payment Enclosed
$_______________
Make checks payable to North Jersey Section
IEEE (Credit Cards cannot be processed at this time).
Back
to top
IEEE North
Jersey Section Course
C# .NET Programming
Saturday, March 13, 2010 through May 15, 2010
Eight weekly classes (March 13, 20, 27, April 3, 10, May 1, 8, 15,
2010)
Place: Room ECEC 202, New Jersey Institute of
Technology, 161 Warren Street,
Newark, New Jersey
07102
(Checks should not be mailed to this address)
IEEE
North Jersey Section thanks New Jersey Institute of Technology, for sponsoring
this course.
The IEEE North
Jersey Section is offering a course entitled "C# .NET Programming".
Since 2004, C# .NET
has generated significant headway in Fortune 1000 enterprise development
systems. Dice.com lists 700+ C# .NET jobs in the New York tri-state area daily! This course
will cover the fundamentals of C# language, the .NET framework, window and web-based applications, ADO.NET,
ASP.NET, and XML. It will be useful for anyone to develop
applications based upon these tools.
You will receive
the IEEE Certificate of Completion when you finish the course. Microsoft Corp. has MCAD and MCSD
certifications. You may wish to get certified
by taking the necessary Microsoft exams with the knowledge gained from this
course.
Instructor: Donald Hsu, Ph.D.,
has been a corporate manager for 11 years and is an experienced trainer. Since 2004, he has trained 700+ people in
database, Java, WebLogic, XML, and C# .NET courses in 7 organizations.
TOPICS
1. Compare the
enterprise development tools using Java to C# .NET
2. Define Visual
Studio .NET Version 2005
to 2008
3. Identify C#
syntax, data type, control structures and common language runtime
4. Distinguish
methods, arrays, object-oriented programming
5. Build graphical
user interface, multithreading, files and streams
6. Explain the
benefit of using extensible markup language (XML)
7. Select
database, SQL server, and ADO .NET
8. Choose ASP .NET, web forms, web services, advanced
topics
9. Present student
Projects
|
WHERE:
|
Room ECEC 202, New Jersey Inst Technology, 161 Warren Street, Newark, NJ
|
|
WHEN:
|
Eight Saturdays, March 13,
20, 27, April 3, 10, May 1, 8, 15, 2010, 9:30 am to 12:00 noon.
|
|
COST:
|
IEEE (& affiliate)
members $500; Non-IEEE members $550.
|
|
CONTACT:
|
Donald Hsu, yanyou “AT” hotmail.com
|
REGISTRATION: C# .NET Programming
Please mail the
completed registration with a check (payable to “North Jersey Section IEEE”) to:
Donald
Hsu, Chair Education Committee, IEEE North Jersey Section, P.O. Box 2093, Fort
Lee, New Jersey 07024.
Name: _____________________________________________ Email address
_________________________________
˙ Non-member
˙ IEEE Member
Member #:_________________________
Member of ________________________ technical society
Employer:___________________________________________________________________________________________________
Employer
Address:____________________________________________________________________________________________
___________________________________________________________________________________________________________
Home
Address:______________________________________________________________________________________________
___________________________________________________________________________________________________________
Business (day) telephone
#:___________________________________
Home telephone #:________________________________
Please enclose
required fee payable to: North Jersey Section IEEE
As soon as the completed
registration form and the payment are received, you are officially registered
for this course.
Registration status
will be confirmed by email.
˙ I wish to receive IEEE Completion Certificate Signature:___________________________________________
Back
to top
IEEE North
Jersey Section Course
Project Management
Tuesday Evenings, April 6, through May 25, 2010
Eight weekly classes (April 6, 13, 20, 27, May 4, 11, 18, 25, 2010)
New Jersey Institute Technology, 161 Warren Street,
Newark, New Jersey (Checks should not be mailed to this address)
IEEE
North Jersey Section thanks New Jersey Institute Technology for sponsoring this
course
The North Jersey
Section IEEE is offering an evening course entitled "Project
Management". Dice.com lists 5800+
Project related jobs in the New York tri-state area daily! This course will
help you to break down a master project into manageable tasks, pinpoint
possible solutions, and provide information to keep the project under
control. Using Microsoft Project
software, you will learn to accomplish various project plans. In addition, it will greatly enhance your
business, communications and interpersonal skills.
You will receive
the IEEE certificate of completion when you finish the course. You may wish to take two Certification exams,
one in Project Management administered by Project Management Institute from the
knowledge that you learned in this course.
(This is not an exclusive PMP-PMI
examination prep course. No PDUs are
issued for PMP eligibility. CEU credits
would be given by IEEE)
Instructor: George Sierchio,
business owner with 16 years of experience.
He did technical consulting, training, and managed over 30
projects. He trained 500+ adult students
in the last 10 years.
TOPICS
1.
Explain the need for a
project manager
2.
Define SOW, PERT, GANTT, CPM,
and Scope of the project
3.
Identify the team members,
resources and plan for the strategy
4.
Calculate schedule, budget
variances, and monitor project progress
5.
Manage changes, estimates,
and communications
6.
Set a baseline, import tasks
from MS Excel, export Project files to MS Word
7.
Create and modify custom
reports, templates and combination views
8.
Share resources and create a
master plan loaded to Project Server
9.
Approve updates and conclude
a project plan
10.
Analyze global E-Commerce and
present student Projects
|
WHERE:
|
New
Jersey Inst Technology, 161 Warren
Street, Newark, NJ.
|
|
WHEN:
|
8
Tuesdays, April 6, 13, 20, 27, May 4, 11, 18, 25, 2010, 6:30-9:00 PM.
|
|
COST:
|
IEEE
(& affiliate) members $500; Non-IEEE members $550.
|
|
CONTACT:
|
Donald
Hsu: yanyou “AT” hotmail.com
|
REGISTRATION: Project Management
Please mail the
registration form with the check (Checks payable to “North Jersey Section IEEE”) to
Donald
Hsu, Chair Education Committee, IEEE North Jersey Section, P. O. Box 2093, Fort Lee, NJ 07024
Name:
_____________________________________________ Email address
_________________________________
˙ Non-member
˙ IEEE Member
Member #:_________________________
Member of _____________________________ technical society
Employer:___________________________________________________________________________________________________
Employer
Address:____________________________________________________________________________________________
___________________________________________________________________________________________________________
Home
Address:______________________________________________________________________________________________
___________________________________________________________________________________________________________
Business (day)
telephone #:___________________________________ Home telephone
#:________________________________
Please enclose
required fee payable to: North
Jersey Section IEEE
As soon as a
completed registration form and the payment are received, you are officially
registered for this course. Registration
status will be notified by email.
˙ I wish to receive the IEEE Completion
Certificate Signature:___________________________________________
Back
to top