Dr. Edward L. Dreizin: peer reviewed publications

The papers can be downloaded from the NJIT web domain.  If you are not in the NJIT domain, please e-mail me directly (dreizin@njit.edu) should you have interest in any of the listed below papers.  I would be happy to send you a file right away.   Any questions and comments sent by e-mail are also greatly appreciated.

Liu, X., Schoenitz, M., Dreizin, E.L., Combustion of Mg and composite Mg ·S powders in different oxidizers. Combustion and Flame 195, pp. 292-302 (2018)

Chintersingh, K.-L., Schoenitz, M., Dreizin, E.L. Combustion of boron and boron–iron composite particles in different oxidizers. Combustion and Flame 192, pp. 44-58 (2018)

Hastings, D.L., Dreizin, E.L., Reactive Structural Materials: Preparation and Characterization. Advanced Engineering Materials 20 (3) 1700631 (2018) 

Liu, X., Chintersingh, K.-L., Schoenitz, M., Dreizin, E.L. Reactive Composite Boron–Magnesium Powders Prepared by Mechanical Milling. Journal of Propulsion and Power 34 (3) pp. 787-794 (2018)

Nakpan, W., Grinshpun, S.A., Yermakov, M., Indugula, R., Reponen, T., Wang, S., Schoenitz, M., Dreizin, E.L. Inactivation of aerosolized surrogates of Bacillus anthracis spores by combustion products of aluminum- and magnesium-based reactive materials: Effect of exposure time. Aerosol Science and Technology 52 (5) pp. 579-587 (2018)

Nguyen, Q., Huang, C., Schoenitz, M., Sullivan, K.T., Dreizin, E.L. Nanocomposite thermite powders with improved flowability prepared by mechanical milling. Powder Technology 327 pp. 368-380 (2018)

Wang, S., Schoenitz, M., Grinshpun, S.A., Yermakov, M., Dreizin, E.L. Biocidal effectiveness of combustion products of iodine-bearing reactive materials against aerosolized bacterial spores. Journal of Aerosol Science 116 pp. 106-115 (2018)

Hastings, D.L., Schoenitz, M., Dreizin, E.L., High density reactive composite powders. Journal of Alloys and Compounds 735 pp. 1863 – 1870 (2018)

Lagoviyer, O.S., Schoenitz, M., Dreizin, E.L. Effect of milling temperature on structure and reactivity of Al–Ni composites. Journal of Materials Science 53 (2), pp 1178–1190 (2018)

Monk, I., Schoenitz, M., Dreizin, E.L. The Effect of Heating Rate on Combustion of Fully Dense Nanocomposite Thermite Particles. Combustion Science and Technology 190 (2) pp. 203-221 (2018)

Valluri, S.L., Monk, I., Schoenitz, M., Dreizin E.L. Fuel-rich aluminum–metal fluoride thermites. International Journal of Energetic Materials and Chemical Propulsion, 16(1) pp. 81–101 (2017)

Dreizin, E.L., Schoenitz, M. Mechanochemically prepared reactive and energetic materials: a review Journal of Materials Science 52(20), pp. 11789-11809 (2017)

Liu, X., Schoenitz, M., Dreizin, E.L. Boron-based reactive materials with high concentrations of iodine as a biocidal additive. Chemical Engineering Journal 325, pp. 495-501 (2017)

Lagoviyer, O.S., Krishtopa, L., Schoenitz, M., Trivedi, N.J., Dreizin, E.L. Mechanochemical Nitration of Aromatic Compounds. Journal of Energetic Materials pp. 1-11 (2017)

Wang S., Liu X., Schoenitz M., Dreizin, E.L., Nanocomposite Thermites with Calcium Iodate Oxidizer. Propellants Explosives and Pyrotechnics 42, pp. 284–292 (2017)

Liu X., Gonzales J., Schoenitz M., Dreizin E.L., Effect of purity and surface modification on stability and oxidation kinetics of boron powders. Thermochimica Acta 652, pp. 17-23 (2017)

Valluri S.K., Schoenitz M., Dreizin E.L., Metal-rich aluminum–polytetrafluoroethylene reactive composite powders prepared by mechanical milling at different temperatures Journal of Materials Science 52 (12), pp. 7452-7465 (2017)

Wang S., Schoenitz M., Dreizin E.L., Combustion of boron and boron-containing reactive composites in laminar and turbulent air flows. Combustion Science and Technology 189 (4), pp. 683-697 (2017)

Monk, I., Schoenitz, M., Jacob, R.J., Dreizin, E.L., Zachariah, M.R. Combustion Characteristics of Stoichiometric Al-CuO Nanocomposite Thermites Prepared by Different Methods. Combustion Science and Technology 189 (3), pp. 555-574 (2017)

Monk, I., Schoenitz, M., Dreizin, E.L. Modes of Ignition of Powder Layers of Nanocomposite Thermites by Electrostatic Discharge. Journal of Energetic Materials 35 (1), pp. 29-43 (2017)

Grinshpun, S.A., Yermakov, M., Indugula, R., Abraham, A., Schoenitz, M., Dreizin, E.L. Aluminum-based materials for inactivation of aerosolized spores of Bacillus anthracis surrogates.  Aerosol Science and Technology 51 (2) pp. 224-234 (2017)

Abraham A.,  Zhong Z., Liu R., Grinshpun S.A., Yermakov M., Indugula, R., Schoenitz M., Dreizin E.L., Preparation, Ignition, and Combustion of Mg·S Reactive Nanocomposites.  Combustion Science and Technology 188 (8), pp. 1345-1364 (2016)

Chintersingh K., Schoenitz, M., Dreizin, E.L., Oxidation kinetics and combustion of boron particles with modified surface.  Combustion and Flame 173, pp. 288-295 (2016)

Abraham, A., Nie, H., Schoenitz, M., Vorozhtsov, A.B., Lerner, M., Pervikov, A., Rodkevich N.,  Dreizin, E.L., Bimetal Al–Ni nano-powders for energetic formulations.  Combustion and Flame 173, pp. 179-186 (2016)

Nie, H., Schoenitz, M., Dreizin E.L., Oxidation of differently prepared Al-Mg alloy powders in oxygen. Journal of Alloys and Compounds 685, pp. 402-410 (2016)

Wang, S., Mohan, S., Dreizin, E.L., Effect of flow conditions on burn rates of metal particles.  Combustion and Flame 168, pp. 10-19 (2016)

Chintersingh K., Nguyen, Q., Schoenitz, M., Dreizin, E.L., Combustion of boron particles in products of an air–acetylene flame. Combustion and Flame 172, pp. 194-205 (2016)

Wang, S., Abraham, A., Zhong, Z., Schoenitz, M., Dreizin, E.L., Ignition and combustion of boron-based Al·B·I2 and Mg·B·I2 composites. Chemical Engineering Journal 293, pp. 112-117 (2016)

Vorozhtsov A.B., Lerner, M., Rodkevich, N., Nie, H., Abraham, A., Schoenitz, M., Dreizin E.L. Oxidation of nano-sized aluminum powders. Thermochimica Acta 636 pp. 48-56 (2016)

Abraham A., MacDonald, N.A., Dreizin E.L., Reactive Materials for Evaporating Samarium Propellants, Explosives, Pyrotechnics DOI 10.1002/prep.201500263 (2016)

Nie H., Schoenitz M., Dreizin E.L. Initial stages of oxidation of aluminum powder in oxygen. Journal of Thermal Analysis and Calorimetry, 125 (1), pp. 129-141 (2016)

Wang, S., Schoentiz, M., Dreizin, E.L. Mechanically alloyed magnesium–boron–iodine composite powders. Journal of Materials Science 51(7), pp. 3585-3591 (2016)

Abraham, A., Schoenitz, M., Dreizin, E.L. Energy storage materials with oxide-encapsulated inclusions of low melting metal. Acta Materialia 107 pp. 254-260 (2016)

Guerrero, S.E., Dreizin, E.L., Shafirovich, E. Combustion of thermite mixtures based on mechanically alloyed aluminum–iodine material. Combustion and Flame 164, pp. 164-166 (2016)

Abraham A., Piekiel N.W., Morris C.J., Dreizin E.L. Combustion of Energetic Porous Silicon Composites Containing Different Oxidizers. Propellants, Explosives, Pyrotechnics 41 (1) pp. 179-188. DOI: 10.1002/prep.201500108 (2016)

Nie, H., Schoenitz, M., Dreizin, E.L. Oxidation of Magnesium: Implication for Aging and Ignition. Journal of Physical Chemistry C 120 (2) pp. 974-983 (2016)

Quijano, D., Corcoran, A.L., Dreizin, E.L., Combustion of Mechanically Alloyed Aluminum-Magnesium Powders in Steam. Propellants Explosives, and Pyrotechnics 40, pp. 749-754 (2015)

Dreizin, E.L., Schoenitz, M., Correlating ignition mechanisms of aluminum-based reactive materials with thermoanalytical measurements. Progress in Energy and Combustion Science 50 pp. 81-105 (2015)

Monk, I., Williams, R., Liu, X., Dreizin, E.L., Electro-static discharge ignition of monolayers of nanocomposite thermite powders prepared by arrested reactive milling. Combustion Science and Technology 187 pp. 1276–1294 (2015)

Abraham, A., Obamedo, J., Schoenitz, M., Dreizin, E.L., Effect of composition on properties of reactive Al·B·I2 powders prepared by mechanical milling. Journal of Physics and Chemistry of Solids 83 pp. 1-7 (2015)

Rodriguez, D.A., Dreizin, E.L., Shafirovich, E., Hydrogen generation from ammonia borane and water through combustion reactions with mechanically alloyed Al·Mg powder. Combustion and Flame 162 pp. 1498–1506 (2015)

Aly, Y., Dreizin, E.L., Ignition and combustion of Al·Mg alloy powders prepared by different techniques. Combustion and Flame 162 pp. 1440–1447 (2015)

Wang, S., Corcoran, A.L., Dreizin, E.L., Combustion of magnesium powders in products of an air/acetylene flame. Combustion and Flame 162 pp. 1316–1325 (2015)

Sippel, T.R., Son, S.F., Groven, L.J., Zhang, S., Dreizin, E.L., Exploring mechanisms for agglomerate reduction in composite solid propellants with polyethylene inclusion modified aluminum. Combustion and Flame 162(3) pp. 846-854 (2015)

Corcoran A.L., Wang, S., Aly, Y., Dreizin E.L., Combustion of mechanically alloyed Al·Mg powders in products of a hydrocarbon flame. Combustion Science and Technology 187, pp. 807–825 (2015)

Machado, M.A., Rodriguez, D.A., Aly Y., Schoenitz, M., Dreizin, E.L., Shafirovich, E., Nanocomposite and mechanically alloyed reactive materials as energetic additives in chemical oxygen generators. Combustion and Flame 161 pp. 2708–2716 (2014) 

Dreizin, E.L., Effect of surface tension on the temperature of burning metal droplets. Combustion and Flame 161 pp. 3263–3266 (2014)

Williams R.A., Schoenitz, M., Ermoline, A., Dreizin, E.L., Low-temperature exothermic reactions in fully-dense Al/MoO3 nanocomposite powders. Thermochimica Acta 594 pp. 1–10 (2014)

Dreizin E.L., Allen D.J., Glumac N.G. Depression of melting point for protective aluminum oxide films Chemical Physics Letters 618, 63-65 (2015)

Abraham, A., Zhang, S., Aly, Y, Schoenitz, M, and Dreizin, E.L. Aluminum-iodoform composite reactive material Advanced Engineering Materials 16(7), pp. 909-917 (2014)

Vummidi Lakshman, S., Dreizin E.L., Schoenitz M., Evaluation of K–H3O jarosite as thermal witness material. Journal of Thermal Analysis and Calorimetry 117 (1), pp. 141-149 (2014)

Williams, R.A., Patel, J.V., Dreizin, E.L. Ignition of fully dense nanocomposite thermite powders by an electric spark.  Journal of Propulsion and Power 30(2), pp. 765-774 (2014)

Shaw, W.L., Williams, R.A., Dreizin, E.L., Dlott, D.D. Using laser-driven flyer plates to study the shock initiation of nanoenergetic materials. Journal of Physics: Conference Series Volume 500, Issue PART 18, 2014, Article number 182010.

Shaw, W.L., Dlott, D.D., Williams, R.A., Dreizin, E.L. Ignition of nanocomposite thermites by electric spark and shock wave. Propellants, Explosives, Pyrotechnics. 39 (3), pp. 444-453 (2014)

Vummidi Lakshman, S., Mohan, S., Dreizin, E.L., Schoenitz, M., Kinetics of thermal decomposition of a synthetic K-H3O jarosite analog. Journal of Thermal Analysis and Calorimetry 115 (1), pp. 609-620 (2014)

Aly, Y., Hoffman, V.K., Schoenitz, M., Dreizin, E.L. Reactive, mechanically alloyed Al·Mg powders with customized particle sizes and compositions. Journal of Propulsion and Power 30 (1), pp. 96-104 (2014)

Aly, Y., Zhang, S., Schoenitz, M., Hoffmann, V.K., Dreizin, E.L., Yermakov, M., Indugula, R., Grinshpun, S.A. Iodine-containing aluminum-based fuels for inactivation of bioaerosols. Combustion and Flame 161 (1), pp. 303-310 (2014)

Williams, R.A., Schoenitz, M., Dreizin, E.L., Validation of the Thermal Oxidation Model for Al/CuO Nanocomposite Powder. Combustion Science and Technology 186, pp. 47-67 (2014)

Ermoline, A., Yildiz, D., Dreizin, E.L., Model of heterogeneous combustion of small particles.  Combustion and Flame 160 (12), pp. 2982–2989 (2013)

Zhang, S., Dreizin, E. L., Reaction Interface for Heterogeneous Oxidation of Aluminum Powders, Journal of Physical Chemistry C, 117 (27), pp. 14025–14031 (2013)

Santhanam, P.R., Ermoline, A., Dreizin, E.L. Discrete element model for an attritor mill with impeller responding to interactions with milling balls, Chemical Engineering Science 101 pp. 366–373 (2013)

Nie, H., Zhang, S., Schoenitz, M., Dreizin, E.L., Reaction interface between aluminum and water, International Journal of Hydrogen Energy 38 pp. 11222-11232 (2013)

Zhang, S., Schoenitz, M., Dreizin, E.L., Nearly Pure Aluminum Powders with Modified Protective Surface, Combustion Science and Technology, 185(9), pp. 1360-1377 (2013)

Corcoran, A., Mercati, S., Nie, H., Milani, M., Montorsi, L., Dreizin,M E.L., Combustion of fine aluminum and magnesium powders in water. Combustion and Flame 160 (10) pp. 2242–2250 (2013) 

Santhanam, P., Dreizin, E.L., Real time indicators of material refinement in an attritor mill. AIChE Journal.  59 (4) pp. 1088-1095 (2013)

Vummidi Lakshman S., Mohan, S., Dreizin, E.L., Schoenitz, M. Kinetics of thermal decomposition of a synthetic K–H3O jarosite analog. Journal of Thermal Analysis and Calorimetry DOI 10.1007/s10973-013-3295-9

Aly, Y., Schoenitz, M., Dreizin, E.L. Ignition and combustion of mechanically alloyed Al-Mg powders with customized particle sizes. Combustion and Flame 160 (4) pp. 835-842 (2013)

Corcoran, A.L., Hoffmann, V.K., Dreizin, E.L. Aluminum particle combustion in turbulent flames  Combustion and Flame 160 (3) pp. 718-724 (2013)

Williams, R.A., Patel, J.V., Ermoline, A., Schoenitz, M., Dreizin, E.L. Correlation of optical emission and pressure generated upon ignition of fully-dense nanocomposite thermite powders Combustion and Flame 160 (3) pp. 734-741 (2013)    

Badiola, C., Dreizin, E.L. Combustion of micron-sized particles of titanium and zirconium Proceedings of the Combustion Institute 34 (2) pp. 2237-2243 (2013)

Zhang, S., Schoenitz, M., Dreizin E.L., Oxidation, ignition and combustion of Al-hydrocarbon composite reactive powders. International Journal of Energetic Materials and Chemical Propulsion 11 (4) pp. 353–373 (2012)

Williams, R.A., Schoenitz, M., Ermoline, A., Dreizin E.L., On gas release by thermally-initiated fully-dense 2Al·3CuO nanocomposite powder. International Journal of Energetic Materials and Chemical Propulsion, 11 (3) pp. 275–292 (2012)

Badiola, C., Dreizin, E.L., On weak effect of particle size on its burn time for micron-sized aluminum powders. Combustion Science and Technology 184: 12, pp. 1993-2007 (2012)

Dreizin, E.L., Badiola, C., Zhang, S., Aly, Y., Particle combustion dynamics of metal-based reactive materials. International Journal of Energetic Materials and Chemical Propulsion. 10(4) pp. 297-319 (2011)

Beloni, E., Dreizin E.L., Model of heating and ignition of conductive polydisperse powder in electrostatic discharge. Combustion Theory and Modelling, 16 (6) pp. 976-993 (2012)

Stamatis, D., Ermoline, A., and Dreizin E.L., A multi-step reaction model for ignition of fully-dense Al-CuO nanocomposite powders. Combustion Theory and Modelling, 16 (6) pp. 1011-1028 (2012)

Grinshpun, S.A., Adhikari, A., Yermakov, M., Reponen, T., Dreizin, E., Schoenitz, M., Hoffmann, V., Zhang, S. Inactivation of aerosolized Bacillus atrophaeus (BG) endospores and MS2 viruses by combustion of reactive materials. Environmental Science and Technology 46 (13), pp. 7334-7341 (2012)

Nie, H., Schoenitz, M., Dreizin E.L. Calorimetric investigation of the aluminum–water reaction. International Journal of Hydrogen Energy. 37(15):11035-11045 (2012)

Santhanam, P.R., Dreizin E.L. Predicting conditions for scaled-up manufacturing of materials prepared by ball milling. Powder Technology 221:403–411(2012)

Zhang, S., Badiola, C., Schoenitz, M., Dreizin, E.L. Oxidation, Ignition, and Combustion of Al∙I2 Composite Powders. Combustion and Flame 159:1980–1986 (2012)

Mohan, S., Ermoline, A., Dreizin, E.L., Pyrophoricity of nano-sized aluminum particles.  Journal of  Nanoparticle Research 14:723 (2012)

Beloni E., Santhanam, P.R., Dreizin, E.L. Electrical conductivity of a metal powder struck by a spark. Journal of Electrostatics 70 (1), pp. 157-165 (2012)

Williams R.A., Beloni, E., Dreizin E.L., Ignition of Metal Powder Layers of Different Thickness by Electrostatic Discharge. Journal of Propulsion and Power 28 (1), pp. 132-139 (2012)

Ermoline, A., Stamatis, D., Dreizin, E.L. Low-temperature exothermic reactions in fully dense Al–CuO nanocomposite powders. Thermochimica Acta 527, pp. 52– 58 (2012)

Stamatis, D., Dreizin, E.L., Higa, K. Thermal initiation of Al-MoO3 nanocomposite materials prepared by different methods. Journal of Propulsion and Power 27 (5), pp. 1079-1087 (2011)

Aly, Y., Schoenitz, M., Dreizin, E.L. Aluminum-Metal Reactive Composites. Combustion Science and Technology 183: 1107–1132 (2011)

Badiola, C., Gill R.J., Dreizin E.L., Combustion characteristics of micron-sized aluminum particles in oxygenated environments. Combustion and Flame 158: 2064–2070 (2011)

Beloni, E., Dreizin, E.L. Ignition of Titanium Powder Layers by Electrostatic Discharge. Combustion Science and Technology 183: 823–845 (2011)

Ermoline, A., Dreizin, E.L. Equations for the Cabrera-Mott kinetics of oxidation for spherical nanoparticles. Chemical Physics Letters 505 (1-3), pp. 47-50 (2011)

Stamatis, D., Dreizin, E.L., Thermal initiation of consolidated nanocomposite thermites. Combustion and Flame, 158 (8) pp. 1631–1637 (2011)

Ermoline, A., Schoenitz, M., Dreizin, E.L., Reactions leading to ignition in fully dense nanocomposite Al-oxide systems. Combustion and Flame, 158 (6), pp. 1076–1083 (2011)

Dupiano, P, Stamatis, D., Dreizin, E.L., Hydrogen production by reacting water with mechanically milled composite aluminum-metal oxide powders. International Journal of Hydrogen Energy 36 , pp. 4781 – 4791 (2011)

Stamatis, D., Zhu X., Schoenitz, M., Dreizin, E.L., Redner, P. Consolidation and mechanical properties of reactive nanocomposite powders.  Powder Technology 208, pp. 637–642 (2011)

Zhu, X., Schoenitz, M., Dreizin, E.L. Oxidation of Aluminum Particles in Mixed CO2/H2O Atmospheres. Journal of Physical Chemistry C, 114, 18925–18930 (2010)

Ermoline A., Aly Y., Trunov M.A., Schoenitz M., Dreizin E.L., Preparation and Characterization of Granular Hybrid Reactive Materials. International Journal of Energetic Materials and Chemical Propulsion  9(3), pp. 267–284 (2010)

Gill, R.J., Badiola, C., Dreizin, E.L., Combustion Times and Emission Profiles of Micron-Sized Aluminum Particles Burning in Different Environments.  Combustion and Flame, 157 (11) 2010, pp. 2015-2023 (2010)

Zhang, S., Schoenitz, M., Dreizin, E.L., Iodine Release, Oxidation, and Ignition of Mechanically Alloyed Al−I Composites. Journal of Physical Chemistry C, 114 (46), pp 19653–19659 (2010)

Jallo L.J., Schoenitz, M. Dreizin, E.L., Dave, R.N., Johnson, C.E. The effect of surface modification of aluminum powder on its flowability, combustion and reactivity. Powder Technology 204, pp. 63–70 (2010)

Schoenitz M., Patel, B., Agboh, O., Dreizin, E.L., Oxidation of aluminum powders at high heating rates. Thermochimica Acta 507–508, pp. 115–122 (2010)

Grinshpun. S.A., Li, C., Adhikari, A., Yermakov, M., Reponen, T., Schoenitz, M., Dreizin, E., Hoffmann, V., Trunov, M., Method for Studying Survival of Airborne Viable Microorganisms in Combustion Environments: Development and Evaluation. Aerosol and Air Quality Research, 10, pp. 414–424 (2010)

Grinshpun S.A., Adhikari A. Li, C., Reponen T., Yermakov, M. Schoenitz M., Dreizin, E., Trunov, M., Mohan, S., Thermal inactivation of airborne viable Bacillus subtilis spores by short-term exposure in axially heated air flow. Journal of Aerosol Science 41, 352–363 (2010)

Zhang S., Schoenitz, M., Dreizin, E.L., Mechanically alloyed Al–I composite materials. Journal of Physics and Chemistry of Solids 71, pp. 1213–1220 (2010)

Santhanam, P.R., Hoffmann, V.K., Trunov, M.A., Dreizin E.L., Characteristics of aluminum combustion obtained from constant volume explosion experiments. Combustion Science and Technology, 182, pp. 904-921 (2010)

Stamatis, D., Jiang, X., Beloni, E., Dreizin E.L.  Aluminum Burn Rate Modifiers Based on Reactive Nanocomposite Powders. Propellants Explosives and Pyrotechnics, 35, pp. 260 – 267 (2010)

Mohan, S., Furet, L., Dreizin E.L., Aluminum particle ignition in different oxidizing environments. Combustion and Flame, 157 pp. 1356–1363 (2010)

Beloni, E., Dreizin, E.L., Ignition of aluminum powders by electro-static discharge. Combustion and Flame, 157 pp. 1346–1355 (2010)

Vummidi, S.L., Aly, Y. Schoenitz, M., Dreizin, E.L., Characterization of fine aluminum powder coated with nickel as a potential fuel additive. Journal of Propulsion and Power, 26 (3) pp. 454-460 (2010)

Badiola, C., Schoenitz, M., Zhu, X., Dreizin, E.L. “Nanocomposite thermite powders prepared by cryomilling,” Journal of Alloys and Compounds 488 pp. 386–391 (2009)

Mohan, S., Trunov, M.A., Dreizin, E.L. “On possibility of vapor-phase combustion for fine aluminum particles.” Combustion and Flame 156 (11) pp.  2213–2216 (2009)

Gill, R.J., Mohan, S., Dreizin, E.L. “Sizing and Burn Time Measurements of Micron-Sized Metal Powders.”  Review of Scientific Instruments 80, 064101-1 – 064101-7 (2009)

Beloni E., Dreizin, E.L. “Experimental study of ignition of magnesium powder by electro-static discharge.” Combustion and Flame 156 (7) pp. 1386–1395 (2009)

Jiang, X., Trunov M.A., Schoenitz M., Dave, R.N., Dreizin, E.L. “Mechanical alloying and reactive milling in a high energy planetary mill.”  Journal of Alloys and Compounds 478, pp. 246–251 (2009)

Zhu X., Schoenitz M., Dreizin, E.L. “Aluminum Powder Oxidation in CO2 and Mixed CO2/O2 Environments.”  Journal of Physical Chemistry C, 113 (16), pp 6768–6773 (2009)

Schoenitz, M., Chen, C-M., Dreizin, E.L. “Oxidation of Aluminum Particles in the Presence of Water.”  Journal of Physical Chemistry B, 113 (15), pp 5136–5140 (2009)

Dreizin, E.L. “Metal-based reactive nanomaterials.”  Progress in Energy and Combustion Science. 35, pp. 141 – 167 (2009)

Stamatis, D., Jiang, Z., Hoffmann, V.K., Schoenitz, M., Dreizin, E.L. “Fully dense, aluminum-rich Al-CuO nanocomposite powders for energetic formulations.”   Combustion Science and Technology 181 (1), pp. 97-116 (2009)

Umbrajkar S.M., Chen C-M., Schoenitz, M., Dreizin E.L. “On problems of isoconversion data processing for reactions in Al-rich Al–MoO3 thermites.” Thermochimica Acta 477 (1-2), pp. 1 – 6 (2008)

Beloni, E., Hoffmann V. K., Dreizin E. L. “Combustion of Decane-Based Slurries with Metallic Fuel Additives” Journal of Propulsion And Power 24(6) pp. 1403  -1411 (2008)

Mohan S., Trunov, M.A., Dreizin E.L. “Heating and Ignition of Metal Particles in the Transition Heat Transfer Regime” Journal of Heat Transfer 130, pp. 104505-1 – 105505-52008 (2008)

Trunov, M.A., Hoffmann, V.K., Schoenitz, M., and Dreizin E.L. “Combustion of Boron-Titanium Nanocomposite Powders in Different Environments” Journal of Propulsion and Power 24 (2) pp. 184-191 (2008)

Umbrajkar, S.M., Seshadri, S., Schoenitz, M., Hoffmann, V.K., and Dreizin E.L. “Aluminum-Rich Al-MoO3 Nanocomposite Powders Prepared by Arrested Reactive Milling” Journal of Propulsion and Power 24 (2) pp. 192 – 198 (2008)

Mohan, S., Trunov, M.A., and Dreizin E.L. “Heating and Ignition of Metallic Particles by a CO2 Laser” Journal of Propulsion and Power 24 (2) pp. 199 – 205 (2008)

Schoenitz, M., Umbrajkar S., and Dreizin E.L.  “Kinetic Analysis of Thermite Reactions in Al–MoO3 Nanocomposites” Journal of Propulsion and Power 23 (4) pp. 683 – 687 (2007)

Bazyn, T., Glumac, N., Krier, H., Ward, T.S., Schoenitz, M., and Dreizin, E.L., “Reflected Shock Ignition and Combustion of Aluminum and Nanocomposite Thermite Powders” Combustion Science and Technology, 179, pp.457–476 (2007)

Umbrajkar, S.M.., Broad, R., Trunov, M.A.., Schoenitz, M., Dreizin E.L., “Arrested Reactive Milling Synthesis and Characterization of Sodium-Nitrate Based Reactive Composites” Propellants Explosives and Pyrotechnics, 32 (1), pp. 32-41 (2007)

Zhu, X., Schoentiz, M., Dreizin E.L., “Mechanically Alloyed Al-Li Powders” Journal of Alloys and Compounds 432, pp. 111-117 (2007)

Umbrajkar, S.M., Schoenitz, M., Dreizin E.L., “Exothermic reactions in Al-CuO nanocomposites” Thermochimica Acta 451, pp., 34-43 (2006)

Umbrajkar, S.M., Schoenitz, M., Dreizin, E.L., Control of Structural Refinement and Composition in Al-MoO3 Nanocomposites Prepared by Arrested Reactive Milling Propellants Explosives and Pyrotechnics, 31(5), pp. 382-389 (2006)

Zhu, X., Schoenitz, M., Dreizin, E.L., “Oxidation Behavior of Al-Rich Al-Ti Mechanical Alloys” Oxidation of Metals, 65(5/6) 357-376 (2006)

Ward, T.S., Trunov, M.A., Schoentiz, M., Dreizin, E.L., “Experimental Methodology and Heat Transfer Model for Identification of Ignition Kinetics of Powdered Fuels” International Journal of Heat and Mass Transfer, 49 (25-26), pp. 4943-4954 (2006)

Trunov, M.A., Umbrajkar, S.M., Schoenitz, M. Mang, J.T., Dreizin, E.L. "Oxidation and Melting of Aluminum Nanopowders" Journal of Physical Chemistry B, 110(26), pp. 13094-13099 (2006)

Trunov, M.A., Schoenitz, M., Dreizin, E.L., “Effect of Polymorphic Phase Transformations in Alumina Layer on Ignition of Aluminum Particles” Combustion Theory and Modeling, 10  (4) pp. 603-624 (2006)

Shoshin, Y.L., Dreizin, E.L., “Particle combustion rates for mechanically alloyed Al–Ti and aluminum powders burning in air” Combustion and Flame 145 (4) pp. 714-722 (2006)

Shoshin, Y.L., Trunov, M.A., Zhu, X., Schoenitz, M., and Dreizin, E.L., “Ignition of aluminum-rich Al–Ti mechanical alloys in air” Combustion and Flame 144 (4) pp. 688–697 (2006)  

Ermoline A., Schoenitz, M., Dreizin, E.L., “High Temperature Phase Equilibria in the System Zr-O-N” Journal of Materials Research, 21 (2), pp. 320 - 228 (2006)

Chen, W., Schoenitz, M., Ward, T.S., Dave, R.N., and Dreizin, E.L., “Numerical Simulation of Mechanical Alloying in a Shaker Mill by Discrete Element Method” KONA Powder and Particle No 23 pp.152 -162 (2005)

Umbrajkar, S. M., Schoenitz, M., Jones, S.R., and Dreizin, E.L., “Effect of Temperature on Synthesis and Properties of Aluminum-Magnesium Mechanical Alloys” Journal of Alloys and Compounds, V. 40 No 1-2, pp. 70-77, 2005

Schoenitz, M., Zhu, X., Dreizin, E.L., “Carbide Formation in Al-Ti Mechanical Alloys” Scripta Materialia, 53(9), pp. 1095-1099 (2005)

Ward, T.S., Chen, W., Schoenitz, M., Dave, R.N., Dreizin, E.L., “A study of mechanical alloying processes using reactive milling and discrete element modeling” Acta Materialia 53, pp. 2909–2918 (2005)

Trunov, M.A., Schoenitz, M., Zhu, X., Dreizin, E.L., “Effect of Polymorphic Phase Transformations In Al2O3 Film on Oxidation Kinetics of Aluminum Powders” Combustion and Flame, V. 140 No 4, pp. 310-318 (2005)

Trunov, M.A., Schoenitz, M., and Dreizin, E.L., “Ignition of Aluminum Powders under Different Experimental Conditions” Propellants Explosives and Pyrotechnics, V. 40, No 1, pp. 36-43 (2005)

Schoenitz, M., Ward, T.S., and Dreizin, E.L., “Fully Dense Nano-Composite Energetic Powders Prepared By Arrested Reactive Milling” Proceedings of The Combustion Institute 30 pp. 2071-2078 (2005)  link to manuscript

Ermoline, A., Schoenitz, M., Hoffmann, V.K., and Dreizin, E.L., “Experimental Technique for Studying High-Temperature Phases in Reactive Molten Metal Based Systems” Review of Scientific Instruments V. 75 No. 12, pp. 5177-5185 (2004)

Schoenitz, M., and Dreizin, E.L., “Oxidation Processes and Phase Changes in Metastable Al-Mg Alloys” Journal of Propulsion and Power V. 20, No. 6, pp. 1064-1068 (2004) 

Shoshin, Y.L., Dreizin, E.L., “Laminar Lifted Flame Speed Measurements for Aerosols of Metals and Mechanical Alloys” AIAA Journal, V. 42, No. 7, pp.1416-1426 (2004)

Schoenitz, M., Zhu, X., and Dreizin, E.L. “Mechanical Alloys in the Al-rich Part of the Al-Ti Binary System” Journal of Metastable and Nanocrystalline Materials, Vols. 20-21, pp. 455-461 (2004)

Eapen B. Z., Hoffmann V. K., Schoenitz M., Dreizin E. L., “Combustion of Aerosolized Spherical Aluminum Powders And Flakes In Air” Combustion Science and Technology, 176 (7): 1055-1069 (2004)

Schoenitz M., Ward T., and Dreizin E.L. “Preparation of Energetic Metastable Nano-Composite Materials by Arrested Reactive Milling,” Materials Research Society Proceedings, V. 800, pp: AA2.6.1-AA2.6.6 (2004)

Zhu, X., Schoenitz, M., and Dreizin, E.L., “Oxidation Processes and Phase Changes in Metastable Al-Ti Mechanical Alloys” Materials Research Society Proceedings, V. 800, pp: AA3.4.1-AA3.4.6 (2004)

Dreizin, E.L., "Effect of Phase Changes on Metal Particle Combustion Processes" Combustion Explosion and Shock Waves, 39 (6):92-96 (2003)

Schoenitz, M., Dreizin, E.L., "Structure and Properties of Al-Mg Mechanical Alloys" Journal of Materials Research 18(8): 1827-1836 (2003)

Shoshin, Y., and Dreizin, E., "Particle Combustion Rates in Premixed Flames of Polydisperse Metal – Air Aerosols" Combustion and Flame, 133:275-287 (2003)

Schoenitz, M., Dreizin, E.L., and Shtessel, E., "Constant Volume Explosions of Aerosols of Metallic Mechanical Alloys and Powder Blends" Journal of Propulsion and Power, 19(3): 405-412 (2003)

Dreizin, E.L., Shoshin, Y.L., Murdyy, R.S., and Hoffmann, V.K., "Constant pressure flames of aluminum and aluminum-magnesium mechanical alloy aerosols in microgravity" Combustion and Flame 130:381–385 (2002)

Ermoline, A., Schoenitz, M., Dreizin, E., and Yao N., "Production of carbon-coated aluminium nanopowders in pulsed microarc discharge" Nanotechnology 13:638–643 (2002)

Shoshin Y., and Dreizin, E., "Production of well-controlled laminar aerosol jets and their application for studying aerosol combustion processes" Aerosol Science and Technology 36:953-962 (2002)

Thipse, S.S., Schoenitz, M., and Dreizin, E.L., "Morphology and composition of the fly ash particles produced in incineration of municipal solid waste" Fuel Processing Technology 75:173-184 (2002)

Shoshin, Y.L., Mudryy, R., S., and Dreizin, E.L., "Preparation and Characterization of Energetic Al-Mg Mechanical Alloy Powders" Combustion and Flame 128:259 -269 (2002)

Thipse, S.S., and Dreizin, E.L., "Metal partitioning in products of incineration of municipal solid waste" Chemosphere 46:837 -849(2002)

Thipse, S. S., Sheng, C., Booty, M.R., Magee, R.S., and Dreizin, E.L., "Synthetic fuel for imitation of municipal solid waste in experimental studies of waste incineration" Chemosphere 44(5):1071 - 1077 (2001)

Rossi, S., Dreizin, E.L., and Law, C.K., "Combustion of Aluminum Particles in Carbon Dioxide" Combustion Science and Technology, Vol. 164:209 - 237 (2001)

Dreizin, E.L., and Hoffmann, V.K., "Experiments on magnesium aerosol combustion in microgravity" Combustion and Flame 122:20-29 (2000)

Dreizin, E.L., Berman, C.H., and Vicenzi, E.P., "Condensed-phase modifications in magnesium particle combustion in air" Combustion and Flame 122:30-42 (2000)

Dreizin, E.L., "Phase Changes in Metal Combustion" Progress in Energy and Combustion Science, 26 (1): 57-78 (2000)

Dreizin, E.L., Hoffmann V.K., Vicenzi, E.P., "High Temperature Phases In Ternary Zr-O-N Systems" Journal of Materials Research, Vol. 14, No 10:3840-3842 (1999)

Dreizin, E.L., Keil, D.G.., Felder, W., and Vicenzi, E.P., "Phase Changes in Boron Ignition and Combustion", Combustion and Flame 119:272-290 (1999)

Dreizin, E.L., Hoffmann V.K., "Constant Pressure Combustion of Aerosol of Coarse Magnesium Particles in Microgravity" Combustion and Flame 118:262-280 (1999)

Dreizin, E.L., "On the Mechanism of Asymmetric Aluminum Particle Combustion", Combustion and Flame 117:841-850 (1999)

Dreizin, E.L., "Experimental Study of Aluminum Particle Flame Evolution in Normal and Micro-gravity", Combustion and Flame, 116:323-333 (1999)

Molodetsky I.E., Dreizin, E.L., Vicenzi, E.P., and Law, C.K. "Phases of Titanium Combustion in Air" Combustion and Flame 112:522-532 (1998)

Dreizin, E.L., "Droplet Welding: A New Technique for Welding Electrical Contacts" Welding Journal, April 1997, pp. 67-73.

Dreizin, E.L., "Experimental Study of Stages in Aluminum Particle Combustion in Air", Combustion and Flame, 105:541-556 (1996)

Molodetsky, I.E., Dreizin, E.L., Law, C.K., “Evolution of Particle Temperature and Internal Composition for Zirconium Burning in Air” Twenty-Sixth Symposium (International) on Combustion The Combustion Institute, pp. 1919–1927 (1996)

Dreizin, E.L., and Trunov, M.A., "Surface Phenomena in Aluminum Combustion" Combustion and Flame 101:378-382 (1995)

Berman, C.H., Dreizin, E.L.; Hoffmann, V.K.; and Calcote, H.F. "Atmospheric Pressure Glow Discharge for Enhanced Combustion" GRI-95/0243,Gas Research Institute Report, 40 p. (1995)

Dreizin, E.L., Suslov, A.V., and Trunov, M.A., "General Trends in Metal Particle Heterogeneous Combustion," Combust Science and Technology, 89, 22 (1993)

Suslov, A.V., Dreizin, E.L., and Trunov, M.A., Formation of Monodisperse Refractory Metal Particles by an Impulse Discharge" Powder Technology 74, 23 (1993)

Dreizin, E.L., and Trunov, M.A., "Formation of a High-Current Pulsed Gas Discharge as a Source of a Highly-Concentrated Energy Flux to Treat Metal Surfaces," IEEE Transactions on Plasma Science, 21, 6:619 (1993)

Dreizin, E.L., Suslov, A.V., and Trunov, M.A., "Temperature Jumps in Free Metal Particle Combustion," Combustion Science and Technology, 87, 45 (1992)

Dreizin, E.L., Suslov, A.V., and Trunov, M.A., "Interaction of High Temperature Metal Particles with Different Materials" Journal of Aerosol Science 22, Suppl. 1, 277 (1991)

Dreizin, E.L., Suslov, A.V., and Trunov, M.A., "Aerodynamic Resistance to the Movement of High-Temperature Metal Particles," Journal of Aerosol Science 22, Suppl. 1, 281 (1991)

Dreizin, E.L., Suslov, A.V., and Trunov, M.A., "Study of Combustion of Monodisperse Metallic Particles Produced by an Impulse Arc," Combustion, Explosions, and Shock Waves 4, 394 (1990)

Dreizin, E.L., and Suslov, A.V., "Producing Monodisperse Metallic Powders in a Pulsed Electric Arc," Soviet Powder Metallurgy and Metal Ceramics 29, 939 (1990)

Dreizin, E.L., Suslov, A.V., and Trunov, M.A., "Study of Properties of Monodisperse Micro-granules of Fire-Proof Metals Produced in a Pulse Arc," Journal of Engineering Physics 60, 595 (1990)

Dreizin, E.L., Suslov, A.V., and Trunov, M.A., "Behavior of Metal Monodisperse Particles in Different Media," Journal of Engineering Physics 60, 620 (1990)