Summary of Research Papers from the Flexible Electronic Devices and Sensors Lab (FEDS Lab) at NJIT 

Y Gu, A Wu, H Sohn, C Nicoletti, Z Iqbal, JF Federici, ‘Fabrication of rechargeable lithium ion batteries using water-based inkjet printed cathodes’, Journal of Manufacturing Processes (in press) (2015).

A Wu, Y Gu, H Tian, JF Federici, Z Iqbal, ‘Effect of alkyl chain length on chemical sensing of polydiacetylene and polydiacetylene/ZnO nanocomposites’, Colloid and Polymer Science 292 (12), 3137-3146 (2014).

A Wu, Y Gu, C Stavrou, H Kazerani, JF Federici, Z Iqbal, ‘Inkjet printing colorimetric controllable and reversible poly-PCDA/ZnO composites’, Sensors and Actuators B: Chemical 203, 320-326 (2014).

A Wu, Y Gu, C Beck, Z Iqbal, JF Federici, ‘Reversible chromatic sensor fabricated by inkjet printing TCDA-ZnO on a paper substrate’, Sensors and Actuators B: Chemical 193, 10-18 (2014).

A Wu, C Beck, Y Ying, J Federici, Z Iqbal, ‘Thermochromism in polydiacetylene–ZnO nanocomposites’, The Journal of Physical Chemistry C 117 (38), 19593-19600 (2013).

A. Wu, C. Beck, Y. Ying, J. Federici, and Z. Iqbal, 'Thermochromism in Polydiacetylene–ZnO Nanocomposites', J. Phys. Chem. C, 2013, 117 (38), pp 19593–19600.  DOI: 10.1021/jp403939p

G. Collins, J. Federici, Y. Imura, and L. H. Catalani, ‘Charge generation, charge transport, and residual charge in the electrospinning of polymers: A review of issues and complications’, Journal of Applied Physics 111 (4) , 044701 (2012). http://dx.doi.org/10.1063/1.3682464

Y. Li Hor, Z. Szabó, H. C. Lim, J. F. Federici, E. P. Li, 'Terahertz response of microfluidic-jetted three-dimensional flexible metamaterials', Applied Optics 49 (8) , pp. 1179-1184 (2010).

S. Liu, R. Farrow, J. L. Zunino III, H. C. Lim, J. Federici, and G. Thomas, 'Microfabricated implantable pressure sensor for flow measurement', Proc. SPIE 6884, 68840I (2008).

S. Liu, R. Farrow, J. L. Zunino III, H. C. Lim, J. Federici, and G. Thomas, 'Microfabricated implantable pressure sensor for medical applications', Proc. SPIE 6886, 688606 (2008).

H. C. Lim, Y. F. Hor, Y. L. Hor, J. L. Zunino III, and J. F. Federici, 'Poly (3, 4-Ethylenedioxythiophene) - Poly (4-Styrenesulfonate) for Humidity Sensing Using Ink-jet Printing Technique on Flexible Polyimide Substrate', Sensors & Transducers Journal, Vol. 101, Issue 2, February 2009, pp. 52-59.

H. C. Lim, J. Zunino, and J. F. Federici, ‘Flexible membrane LRC strain sensor fabricated using MEMS Method’, Sensors and Transducers Journal 91, 39-46 (2008).

H. C. Lim, J. Zunino III and J. F. Federici, "Flexible Membrane Impact Sensor via Thick Film Method", Sensors and Transducers Journal Vol. 85, Issue 11, November 2007 pp. 1757-1764

J. L. Zunino III, "Development of Materials and Sensors for the U.S. Army’s Active Coatings Technology Program", Sensors and Transducers Journal Special Issue, October 2007 pp. 51-59

H. C. Lim, J. L. Zunino III, and J. F. Federici, 'Cyclic thin film flexible pressure sensor testing', Proc. SPIE 6463, 64630A  (2005).

H. C. Lim, S. Liu, G. Thomas and J. F. Federici, "Flexible Membrane Micro Flow-rate Threshold Flow Sensor", Sensors and Transducers Journal Vol. 86, Issue 12, December 2007 pp. 1816-1822

H. C. Lim, B. J. Shulkin, M. J. Pulikal, S. Liu1, R. Petrova, G. Thomas, S. Wagner,K. Sidhu, and J. F. Federici, "Flexible membrane pressure sensor", Sensors and Actuators A (Physical), 119,  332-5 (2005).

Liu, Sheng, Lim, Hee C., Zunino, James, Thomas, Gordon, Farrow, Reginald, and Federici, John, "Microfabricated implantable flowmeter", Reliability, Packaging, Testing, and Characterization of MEMS/MOEMS VII Journal Vol. 6884 Proceedings of SPIE Photonics West Conferences, MOEMS-MEMS 2008, SPIE proceedings, 19-24 Jan 2008, San Jose, CA [6884-16] S4

Liu, Sheng, Lim, Hee C., Zunino, James, Thomas, Gordon, Farrow, Reginald, and Federici, John, "Microfabricated implantable flowmeter for CSF shunts", Microfluidics, BioMEMS, and Medical Microsystems VI Journal Vol. 6886 Proceedings of SPIE Photonics West Conferences, MOEMS-MEMS 2008, SPIE proceedings, 19-24 Jan 2008, San Jose, CA [6886-7] S2

Y. L. Hor, H. C. Lim, J. F. Federici, ‘Fabrication of metamaterials in THz region using ink jet system and characterization using THz-TDS’, 2008 ISSSR conference, Hoboken, NJ.