New Jersey Institute of Technology (NJIT):

 Cadence University Program Page

Cadence^TM University Program Member

Cadence use at NJIT

Currently, the Digital Integrated Circuits Bundle, the Custom Integrated Circuits bundle, the Verification Bundle, and the Packaging and Boards bundle are all actively used in the Physics Department at the New Jersey Institute of  Technology. For more information on our use of Cadence tools, the groups and courses using the tools, and for value added items, please see the following classes.

• ECE-792B-808 Pre-doctor research for X-ray synchrotron detector system development including the ASICs design to control the multi-channel sensor – Prof. Trevor Tyson

Value Added Items for Digital IC and Custom Integrated Circuits

• Schematic tutorial and simulation
• Inverter layout tutorial 

Disclaimer

These pages only contain information that is related to products produced by Cadence Design Systems, Inc.

These pages do NOT contain any information on any other vendor's products.

This is NOT a "Cadence Homepage".

Information is provided "as is" without warranty or guarantee of any kind. No statement is made and no attempt has been made to examine the information, either with respect to operability, origin, authorship, or otherwise.

Please use this information at your own risk - and any attempt to use this information is at your own risk - we recommend using it on a copy of your data to be sure you understand what it does and under your conditions. Keep your master intact until you are personally satisfied with the use of this information within your environment.

Cadence is a registered trademark of Cadence Design Systems, Inc., 2655 Seely Avenue, San Jose, CA 95134.

Contact Information:

Prof. Trevor A. Tyson (tyson@adm.njit.edu)