1. Sengupta, Arijit K. and Jiang, Xiaopeng, Analysis of internal torso loading in asymmetric and dynamic lifting tasks, Occupational Ergonomics, accepted. February 24, 2017.

2. Evanda Henry, Get a grip: analysis of muscle activity and perceived comfort in using stylus grips, MS Thesis, NJIT, Dec 25, 2016

3. Olusola O Adedoyin, Effectiveness of workplace physical activity programs, MS Project, NJIT, January 2016.

4. Ahmed, G. and Sengupta, A. K. Surface EMG evaluation of medical sonography scanning task – a pilot study, Abstract published and presented in the 6th International Conference on Applied Human Factors and Ergonomics (AHFE 2015) and its affiliated conferences held at Caesars Palace, Las Vegas, USA July 26-30, 2015. Power point presentation

5. Arijit K. Sengupta and Xiaopeng Jiang, Effect of background music in a computer word processing task, Occupational Ergonomics 12 (2015) 165–177 165. DOI 10.3233/OER-150232, IOS Press

6. Henry, E and Sengupta, A.K. Estimation of Low Back Loading in Bedside Care: The Importance of Bed Positioning to Patient Handling Task, poster presentation at the 36th Annual Scientific Meeting, March 20, 2015, Occupational Health and Safety in Construction: New Preventive Models for Large Construction Projects, Icahn School of Medicine at Mount Sinai, Hess Center for Science & Medicine, Davis Auditorium, 2nd Floor, 1470 Madison Avenue, New York, NY.

7. Kellie Caldwell, Effects of Onsite Stretching Exercise on Employee Musculoskeletal Discomfort and Wellbeing, MS Thesis, NJIT, May 2015.

8. Eman Alawamleh, Healthcare Information Technology & Computer Contamination, MS Project, NJIT, August 2015.

9. Salil Joseph and Arijit Sengupta, Effect of Backpack Carriage Position on Physiological Cost and Subjective Responses of University Students, . Proceedings of the 5th International Conference on Applied Human Factors and Ergonomics AHFE 2014, Kraków, Poland 19-23 July 2014, ISBN:978-1-4951-1572-1, Edited by T. Ahram, W. Karwowski and T. Marek, page 5899-5906.

10. Evanda Henry, Stephanie Richmond, Nashrah Shah, and Arijit Sengupta, Get a Grip: Analysis of Muscle Activity and Perceived Comfort in Using Stylus Grips of Touchscreen Tablet Computer, Proceedings of The XXVIth Annual Occupational Ergonomics and Safety Conference, El Paso, TX, USA, June 5-6, 2014, ISBN: 97819384965-2-3, Page 70-76.

11. Ruby Rogers, Bandar Sayyad, & Arijit Sengupta. Backpack Carrying Behaviors & Associated Discomforts Among University Students: A Pilot Study, Poster presented at Safety 2014, Orlando, FL, June 8-11. Video of the presentation.

12. Evanda Henry, Stephanie Richmond, Nashrah Shah & Arijit Sengupta, Analysis of Stylus Grips for Touchscreen Tablet Computer, Poster presented at Safety 2014, Orlando, FL, June 8-11. Video of the presentation

13. Ruby Rogers, Video Games: A Study of the Impact of Controller Design on Gamer Experience, MS Project, NJIT, May 2014.

14. Souror Erfani, Non-auditory Effect of Noise, MS Project, NJIT, May 2013.

15. Salina Peoples-Igbinoba, Behavior Based Safety: A Comprehensive Overview, MS Project, NJIT, May 2013

16. Micheal Ajai, Minimizing laboratory hazard and accidents with the effective safety program, MS Project, NJIT, 2013.

17. Bryan Reyes, OSHA’s Revision of the Hazard Communication Standard (HCS) to conform with the United Nations' (UN) Globally Harmonized System of Classification and Labeling of Chemicals (GHS), MS Project, NJIT, December 2012

18. Gul Ahmed, Ergonomic evaluation of shoulder muscle activation during light weight hand tool exertion task, MS Thesis, NJIT, August 2012

19. Ian Guy, Effect of Pollution in Gulf of Mexico, MS Project, NJIT, May 2012.

20. Javana McPherson, E-Waste and its effects: A literature Survey, MS Project, NJIT, May 2012.

21. Sengupta A. K and Latta, An Analysis of Grip Design for Manual Hammer Stapling Tool, W. 4th International Conference on Applied Human Factors and Ergonomics 2012 held in July 21-25, 2012, San Francisco, CA, page 411-420.

22. X. Jiang, A. Sengupta. A biomechanical evaluation of dynamic and asymmetric lifting using the AnyBodyTM commercial software: A pilot study, 4th International Conference on Applied Human Factors and Ergonomics 2012 held in July 21-25, 2012, San Francisco, CA, page 4752-4759.

23. X. Jiang, A. Sengupta. Effect of Music and Induced Mental Load in Word Processing Task, IEEE SMC 2011 Conference, Anchorage, Alaska, October 9-12, 2011, page 3261-3266.

24. Xiaopeng Jiang, Biomechanical analysis of asymmetric and dynamic lifting task, MS Thesis, NJIT, May, 2011.

25. Latta, Wayne, The effect of handle characteristics of a hammer stapler on biomechanical and physiological response, MS Thesis, NJIT, May, 2010

26. Mayeanna Kamara, Effectiveness of safety training, MS Thesis, NJIT, May, 2010.

27. Elizbha Philip, Evaluation of medical alarm sounds, MS Thesis, NJIT, January, 2009.

28. Stephen J. Benstowe, Long driving hours and health of truck drivers, MS Thesis, NJIT, January, 2008

29. Effect Of Glove Port Height On Shoulder And Back Stresses, ACE 2007 Conference, 38th Annual Conference of the Association of Canadian Ergonomists, Toronto Marriott Eaton Centre, Toronto, Ontario, October 14 - 17, 2007.

30. Sengupta, A; Grabiner, S; Kothari, P; Martinez, G, Ergonomic Aspects Of Personal Digital Assistant (Pda) And Laptop Use, PREMUS 2007 conference, Sixth International Scientific Conference on Prevention of Work-Related Musculoskeletal Disorders, Boston, USA,  27–30 August 2007.

31. Brown, Ryan Jamor, Do industrial back support belts reduce stress in asymmetric lifting?, MS Thesis, NJIT, January 2006.

32. McNair, Tamara, An ergonomic job analysis of a work process within a glovebox, MS Thesis, NJIT, August 2006.

33. Williams, Jason Mark, Effect of glove port height on upper body stress for performing laboratory work, MS Thesis, NJIT, August 2006.

34. Arijit K. Sengupta and Ryan J. Brown, Do Industrial Back Belts Reduce Stress in Asymmetric Lifting?, In the conference proceedings of HWWE 2005, Humanising Work and Work Environment,10-12 December 2005, at the Indian Institute of Technology, Guwahati, Assam, India, page 25-30.

35. Reichert, Paul, Patient handling ergonomics, MS Thesis, NJIT, January 2004.

36. DiGironimo, Danielle M., OSHA laboratory safety standard 29 CFR 1910.1450 and achieving compliance in the microelectronic laboratory, MS Thesis, NJIT, May 2004.

37. Chapla, Piyush, How much weight is too much for manual lifting : determining a weight limit guideline for team-effort lifting tasks, MS Thesis, NJIT, August 2004.

38. Arijit K. Sengupta, One -Jang Jeng, and Paul Reichert, Perceived effort and back injury risks of physical therapists in patient transfers between bed and wheelchair. In Advances in Occupational Ergonomics and Safety - V, ed. IOS Press, Proceedings of the XV Annual International Occupational Ergonomics and Safety Conference 2001, Fairfax, Virginia, June 4-7, Pages 80-85.