Go to ECE392 Experiment | 1 | 2 | 3 | 4 | 5 | 6 | 7 | Lab manuals | ECE Lab home |
|
ECE 392 - Electrical Engineering Laboratory II
EXPERIMENT VIII
DESIGN PROJECT
OBJECTIVES
After completing seven series of experiments described in this manual you should have gained sufficient experience with analog and some digital circuits to venture into an exciting area of design and more independent work. If the time allows student teams should select their own circuit projects, assemble, and test them. It is suggested to utilize parts and circuit elements already used in this course and combine them in a new design. If, however, the students prefer to use other components, circuits, or sensors they are only encouraged to do so.
Several experiments
described in this manual as optional, like the one at the end of Experiments
I, may be performed now if there was no time for it earlier. An interesting
project may include a combination of analog and digital
circuits, like an amplifier with adjustable gain or a
filter with adjustable bandwidth, in which parameters are changed by digitally
controlled transmission gates (analog switches). Another example maybe a three
stage amplifier with high input impedance achieved with an
FET, a common emitter amplifier with a BJT (like in
Experiment III) and a BJT voltage follower. The
limits are set only by time and imagination.
PRELAB
Provide a brief
description and a schematic of a circuit you plan to build. Describe also the
expected circuit performance.
REPORT
Make it brief but do not skip essentials: schematics, performance data and, above all, your comments and conclusions.
Go to ECE392 Experiment | 1 | 2 | 3 | 4 | 5 | 6 | 7 | Lab manuals | ECE Lab home |
|